Linshang LS190 Gloss Meter for Automotive Parts Quality Control Malaysia

Linshang LS190 Gloss Meter for Automotive Parts Quality Control Malaysia

 

Surface appearance is an important quality factor for many automotive components. Painted metal parts, plastic trim, coated panels and decorative components may meet dimensional specifications but still be rejected if their gloss level does not match the approved finish.

 

For suitable automotive QC applications, the Linshang LS190 Gloss Meter provides an economical way to convert subjective surface appearance into measurable Gloss Unit (GU) values.

 

With a 60° measurement angle, 0–200 GU measuring range and 1 GU resolution, the LS190 is particularly suitable for routine production and incoming quality inspection where these specifications meet the testing requirement.

 

Why Measure Gloss on Automotive Components?

 

Automotive components are often assembled next to other parts.

 

Even a relatively small appearance difference can become noticeable when two components are positioned side by side.

 

Gloss variation may occur because of changes in:

 

Paint formulation

 

Coating thickness

 

Injection moulding conditions

 

Raw materials

 

Mould condition

 

Surface texture

 

Curing temperature

 

Polishing

 

Supplier production processes

 

A gloss meter provides numerical information that helps QC personnel identify these variations.

 

Typical Automotive Applications

 

Depending on the surface and applicable specification, gloss measurement may be useful for:

 

Painted metal components

 

Plastic trim

 

Interior panels

 

Exterior plastic components

 

Coated brackets

 

Decorative parts

 

Automotive accessories

 

Painted housings

 

Supplier-finished components

 

The applicable measurement geometry and product specification should always be confirmed before testing.

 

Why Visual Inspection Alone Is Not Enough

 

Suppose two plastic interior components are installed next to each other.

 

One operator says:

 

“They look the same.”

 

Another says:

 

“The second one is more glossy.”

 

Lighting conditions can make the disagreement even more difficult.

 

Using a gloss meter, the QC team may obtain:

 

Approved sample: 68 GU

 

Component A: 67 GU

 

Component B: 69 GU

 

Component C: 51 GU

 

Component C now has a measurable difference that can be investigated.

 

Incoming Supplier Inspection

 

Automotive manufacturers and component assemblers often rely on multiple external suppliers.

 

Gloss measurement can be incorporated into incoming inspection to compare:

 

Current delivery vs approved sample

 

New batch vs previous batch

 

Supplier A vs Supplier B

 

Replacement components

 

Customer-approved references

 

This can help detect appearance variation before components reach the assembly process.

 

Production Process Monitoring

 

Gloss measurements can also help manufacturers monitor their own production.

 

For plastic components, changes may be related to:

 

Mould temperature

 

Material condition

 

Injection parameters

 

Mould surface

 

Surface treatment

 

For painted components, possible causes include:

 

Paint mixing

 

Spray settings

 

Coating thickness

 

Drying conditions

 

Curing conditions

 

A change in GU readings does not automatically identify the cause, but it provides a signal that the process should be investigated.

 

Batch-to-Batch Consistency

 

Automotive parts may be produced repeatedly for months or years.

 

Maintaining consistent appearance across these production periods can be challenging.

 

Historical gloss records allow QC departments to compare current production with previous batches.

 

For example:

 

Batch 1: 72 GU

Batch 2: 71 GU

Batch 3: 73 GU

Batch 4: 72 GU

Batch 5: 56 GU

 

The fifth batch clearly requires attention.

 

QC Upper and Lower Limits

 

The Linshang LS190 supports QC upper and lower limit settings.

 

Suppose an automotive plastic component has an approved range of:

 

65–75 GU

 

The operator can measure production samples and compare them against this established requirement.

 

This creates a more consistent decision process than relying entirely on individual visual judgement.

 

Useful for Supplier Quality Management

 

Numerical gloss records can also improve supplier communication.

 

Instead of reporting:

 

“Your latest batch looks duller.”

 

the buyer can provide:

 

Approved sample: 70 GU

Normal supplier range: 68–72 GU

Latest delivery: 54–57 GU

 

This gives both sides measurable information for further investigation.

 

USB Connection and Excel Data Export

 

The LS190 supports USB communication with a computer and data export to Excel.

 

This allows automotive suppliers and QA/QC departments to maintain records such as:

 

Incoming inspection data

 

Production batch measurements

 

Supplier quality reports

 

Customer inspection records

 

Historical gloss trends

 

Corrective-action documentation

 

Traceable data can be especially useful when investigating repeated quality issues.

 

Is 0–200 GU Suitable?

 

The LS190 provides a 0–200 GU measuring range.

 

Whether this is suitable depends on the component and applicable QC requirement.

 

If normal production measurements fall comfortably within this range and 1 GU resolution is sufficient, the LS190 can provide a cost-effective solution.

 

Applications requiring a wider range, finer resolution or different measurement geometry should use an appropriate higher-specification instrument.

 

Why LS190 Can Be Practical for Automotive Suppliers

 

Many automotive component suppliers need inspection instruments at several points:

 

Incoming QC

 

Production

 

Final QC

 

Supplier quality

 

Customer inspection

 

If the LS190 meets the required specification, its economical positioning can make it practical to deploy gloss measurement at multiple inspection points.

 

This may provide greater operational value than sharing one unnecessarily complex instrument between several departments.

 

Conclusion

 

Automotive appearance quality depends on more than colour alone.

 

Differences in surface gloss can make components from different batches or suppliers look inconsistent when assembled together.

 

The Linshang LS190 Gloss Meter provides a practical method for measuring these differences using objective GU values.

 

With its 60° measurement geometry, 0–200 GU range, 1 GU resolution, QC limit function and USB/Excel data capability, the LS190 can support routine automotive component quality control in Malaysia where these specifications meet the application.

 

For manufacturers and automotive suppliers looking for an economical way to improve incoming inspection, production consistency and supplier quality management, the LS190 is a practical instrument to consider.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026