Linshang LS190 Gloss Meter for Furniture and Wood Coating Inspection Malaysia

Linshang LS190 Gloss Meter for Furniture and Wood Coating Inspection Malaysia

 

For furniture manufacturers, surface appearance is an important part of product quality. Two tables, cabinets or wooden panels may use the same colour and coating system but still look different if their final gloss levels are inconsistent.

 

The Linshang LS190 Gloss Meter provides a practical way to measure suitable finished surfaces using numerical Gloss Unit (GU) values instead of relying entirely on visual judgement.

 

With a 60° measurement angle, 0–200 GU measuring range and 1 GU resolution, the LS190 can be used for routine gloss quality control where these specifications match the application.

 

Why Gloss Matters in Furniture Manufacturing

 

Furniture surfaces may use different finishing systems, including:

 

Paint

 

Lacquer

 

Varnish

 

Clear coating

 

Decorative coatings

 

Laminated finishes

 

Coated wood panels

 

Customers normally expect different components of the same furniture set to have a consistent appearance.

 

If one cabinet door is noticeably glossier than the others, the difference may be obvious after installation.

 

Why Visual Inspection Alone Can Be Difficult

 

Furniture is viewed under many lighting conditions.

 

A surface that appears acceptable inside the factory may look different under:

 

Natural sunlight

 

Showroom lighting

 

Office lighting

 

Residential lighting

 

Different QC operators may also judge the same finish differently.

 

A gloss meter provides a numerical value that makes comparison easier.

 

Instead of:

 

“This panel looks slightly duller.”

 

QC personnel can record:

 

Approved panel: 72 GU

 

Panel A: 71 GU

 

Panel B: 73 GU

 

Panel C: 55 GU

 

Panel C clearly deserves further investigation.

 

Monitor Coating Consistency

 

Changes in the finishing process can influence surface gloss.

 

Possible factors include:

 

Coating formulation

 

Coating thickness

 

Mixing ratio

 

Spray application

 

Drying conditions

 

Curing conditions

 

Surface preparation

 

Sanding

 

Polishing

 

Regular gloss measurements can help manufacturers determine whether the finishing process remains consistent.

 

Batch-to-Batch Comparison

 

Furniture products may be manufactured repeatedly over long periods.

 

A customer purchasing an additional cabinet six months later may expect it to match the original furniture.

 

Maintaining gloss records provides another measurable parameter for comparing different production batches.

 

For example:

 

January production: 68 GU

March production: 69 GU

June production: 67 GU

August production: 51 GU

 

The August result indicates that the finishing process or material should be investigated.

 

QC Upper and Lower Limits

 

The Linshang LS190 supports QC upper and lower limit settings.

 

Suppose an approved furniture finish should remain between:

 

65–75 GU

 

Operators can measure finished panels and compare them against the established range.

 

This makes repetitive production inspection more systematic.

 

Incoming Coated Panel Inspection

 

Furniture companies may purchase finished panels or decorative components from external suppliers.

 

Gloss measurement can support incoming inspection by comparing:

 

Current delivery vs approved sample

 

New batch vs previous batch

 

Supplier A vs Supplier B

 

Replacement component vs original component

 

This can help identify appearance differences before the material reaches final assembly.

 

Useful for Supplier Quality Discussions

 

Without numerical measurement, a supplier dispute may become subjective.

 

Buyer:

 

“The new panels are duller.”

 

Supplier:

 

“They look the same.”

 

With gloss records, the discussion can be more objective:

 

Approved sample: 70 GU

Previous deliveries: 68–72 GU

Current delivery: 53–56 GU

 

The measurement does not automatically identify the cause, but it provides useful evidence that the surface condition has changed.

 

USB and Excel Data Export

 

The LS190 supports USB communication with a computer and measurement data export to Excel.

 

Furniture manufacturers can use this capability to maintain:

 

Production QC records

 

Coating batch records

 

Supplier inspection data

 

Approved sample records

 

Customer quality documentation

 

Historical gloss trends

 

Over time, this information can support better process control.

 

Suitable Furniture Applications

 

Depending on the surface and applicable testing method, the LS190 may be considered for suitable:

 

Wooden furniture

 

Painted cabinets

 

Coated panels

 

Office furniture

 

Kitchen cabinets

 

Decorative boards

 

Furniture components

 

Laminated surfaces

 

Interior finishing products

 

Users should confirm that the surface is suitable for 60° measurement and that the instrument can be positioned correctly on the test area.

 

Be Careful with Surface Texture

 

Not every wood or furniture surface is smooth and uniform.

 

Strong grain patterns, rough textures or uneven surfaces can influence gloss measurements.

 

For consistent results:

 

Use defined measurement locations

 

Keep measurement orientation consistent

 

Compare similar surfaces

 

Follow the relevant QC procedure

 

The goal is to create repeatable measurement conditions.

 

LS190 for Routine Furniture QC

 

The LS190 is particularly attractive for furniture manufacturers that do not require a complex laboratory gloss system.

 

Its key features include:

 

60° gloss measurement

 

0–200 GU range

 

1 GU resolution

 

QC limit setting

 

Portable operation

 

USB connection

 

Excel data export

 

For routine production inspection, this combination provides a straightforward way to introduce quantitative gloss control.

 

Conclusion

 

Consistent surface gloss can contribute significantly to the perceived quality of furniture and coated wood products.

 

The Linshang LS190 Gloss Meter allows manufacturers to replace subjective descriptions such as “too shiny” or “too dull” with measurable GU values.

 

For suitable furniture surfaces requiring 60° measurement within 0–200 GU, the LS190 provides an economical solution for production QC, batch comparison and supplier inspection in Malaysia.

 

By combining gloss measurement with consistent testing procedures and historical records, furniture manufacturers can build a more objective and traceable approach to surface-finish quality control.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026