ISO 2813 Gloss Measurement with Linshang LS196 Gloss Meter Malaysia
ISO 2813 Gloss Measurement with Linshang LS196 Gloss Meter Malaysia
For manufacturers that need consistent surface appearance, gloss should be treated as a measurable quality parameter rather than relying only on visual inspection.
ISO 2813 is one of the internationally recognised standards associated with specular gloss measurement for paints and varnishes.
The Linshang LS196 Gloss Meter provides 60° gloss measurement with a wide 0–1000 GU range, making it suitable for many industrial quality-control applications.
What Is ISO 2813?
ISO 2813 specifies methods for determining the gloss value of coatings using defined measurement geometries.
Gloss measurement provides a numerical result expressed in Gloss Units (GU).
This helps manufacturers compare surfaces more objectively.
Instead of saying:
"This coating looks slightly duller."
QA/QC personnel can measure the surface and compare actual gloss values.
Why Is Gloss Measurement Important?
Surface appearance can influence how customers perceive product quality.
Gloss differences may occur because of variations in:
Paint formulation
Coating thickness
Application method
Curing conditions
Drying temperature
Surface preparation
Raw materials
Polishing
Production parameters
A gloss meter provides additional data for monitoring these changes.
60° Gloss Measurement with LS196
The Linshang LS196 uses a 60° measurement angle, commonly used for general-purpose gloss evaluation.
This makes it useful for many industrial applications such as:
Paint
Coatings
Plastic
Automotive components
Furniture
Ceramic products
Industrial panels
Finished manufactured products
Users working to a specific customer or laboratory requirement should always verify the exact geometry and procedure required by the applicable standard.
Wide 0–1000 GU Measurement Range
One of the important advantages of the LS196 is its wide measurement range.
The instrument can measure from 0 to 1000 GU.
This is useful for companies handling materials with significantly different surface finishes, including very glossy and highly reflective products.
Applications may include:
High-gloss coatings
Polished surfaces
Automotive finishes
Glossy plastics
Decorative components
Highly reflective finished products
How to Improve Measurement Consistency
For meaningful quality-control data, measurement procedures should be consistent.
Prepare the Surface
The measurement area should be clean and dry.
Remove dust, fingerprints and other contamination that may influence the result.
Check the Instrument
Check and calibrate the gloss meter according to the manufacturer's recommended procedure.
Use Defined Measurement Points
For repetitive production inspection, establish fixed measurement locations.
This makes comparisons between different products and batches more meaningful.
Take Multiple Measurements
Large surfaces should generally not be evaluated using only one point.
Several readings can help identify local variations in coating or surface finishing.
Record the Results
Keep the GU readings together with product, batch and inspection information.
This creates useful historical quality-control data.
Create an Internal Gloss Specification
Some companies know that a product should be "high gloss" but do not have an established numerical specification.
A practical approach is to select approved samples and measure them.
For example:
Approved Sample A → Record GU
Approved Sample B → Record GU
Approved Sample C → Record GU
The company can then use these measurements as part of developing an internal acceptable range.
This creates a more objective reference for future production.
Supplier Quality Control
Gloss measurement can also improve supplier management.
Suppose several suppliers provide the same coated component.
Instead of comparing appearance only by eye, incoming QC can measure the gloss of each supplier's product.
This makes it easier to identify differences between:
Supplier A
Supplier B
Supplier C
Previous batches
Current batches
The data can then support supplier-quality discussions.
QC Mode for Routine Inspection
The LS196 provides a QC mode for production inspection.
Once suitable limits have been established, operators can compare measurement results against the required range.
This can make repetitive inspection faster and more consistent.
Data Management and Quality Records
The Linshang LS196 supports computer connection and measurement data transmission.
Results can be exported for further processing and analysis.
This can help maintain:
Production records
Batch inspection data
Supplier records
Customer quality documentation
Process-improvement records
Historical gloss trends
For companies implementing more structured quality-management systems, this can be more useful than keeping only handwritten readings.
ISO 2813 vs ASTM D523
Both ISO 2813 and ASTM D523 are commonly referenced in discussions of gloss measurement, but they are separate standards.
Manufacturers should follow whichever standard is specified by their customer, industry or internal procedure.
The Linshang LS196 is designed according to recognised gloss measurement standards including:
ISO 2813
ASTM D523
ASTM D2457
DIN 67530
Always confirm the specific measurement requirements before using results for formal compliance purposes.
Who Can Use the Linshang LS196?
The LS196 can be useful for:
Paint manufacturers
Coating companies
Automotive component manufacturers
Plastic manufacturers
Furniture manufacturers
Ceramic manufacturers
QA/QC departments
Production engineers
Inspection companies
Industrial laboratories
Its 60° measurement geometry and wide 0–1000 GU range provide flexibility across many surface-finish applications.
Linshang LS196 Gloss Meter Supplier Malaysia
MTM Precision supplies professional testing and measurement instruments for Malaysian manufacturing, industrial and QA/QC applications.
If you need a gloss meter for ISO 2813-related testing or general production quality control, contact us with your material and application requirements.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026
