Linshang LS196 Gloss Meter for Printing and Packaging Surface Inspection Malaysia

Linshang LS196 Gloss Meter for Printing and Packaging Surface Inspection Malaysia

 

Surface gloss can significantly influence the appearance of printed and packaging materials. Even when colour reproduction is correct, differences in coating, varnish or surface finishing can cause two printed products to look noticeably different.

 

The Linshang LS196 Gloss Meter provides an objective method for evaluating surface gloss using numerical Gloss Unit (GU) readings.

 

With its 60° measurement angle and wide 0–1000 GU measurement range, the LS196 can be considered for suitable printing, coating and packaging surface quality-control applications.

 

Why Measure Gloss in Printing and Packaging?

 

Gloss affects how customers perceive a finished printed product.

 

For premium packaging, labels and decorative printing, surface appearance can be part of the overall product quality.

 

Gloss variation may occur because of differences in:

 

Printing process

 

Ink application

 

Surface coating

 

Varnish

 

Lamination

 

UV coating

 

Substrate

 

Drying conditions

 

Production parameters

 

Batch variation

 

Visual inspection can identify obvious differences, but it is difficult to quantify them accurately.

 

A gloss meter provides numerical data for comparison.

 

Typical Applications

 

Depending on the material and measurement requirements, gloss measurement may be useful for:

 

Printed packaging

 

Coated paper

 

Labels

 

Cartons

 

Decorative printing

 

Laminated surfaces

 

UV-coated materials

 

Printed panels

 

Packaging components

 

Other suitable finished surfaces

 

Before selecting a gloss meter, users should ensure that the measurement area is large and flat enough for proper instrument positioning.

 

Compare Different Printing Batches

 

Consider a company producing packaging for the same customer every month.

 

The artwork and colour specifications remain unchanged, but the surface finish of one batch appears glossier than the previous batch.

 

A gloss meter can provide objective measurements for comparing the two batches.

 

Instead of reporting:

 

"This batch looks more glossy."

 

QA/QC personnel can record and compare actual GU readings.

 

Evaluate Coating and Varnish Consistency

 

Coatings and varnishes are often used to create a particular visual effect or provide additional surface protection.

 

Changes in coating application can affect gloss.

 

Regular measurement can help companies compare:

 

Before coating

 

After coating

 

Different coating formulations

 

Different application settings

 

Different production lines

 

Different suppliers

 

This provides useful information for process improvement.

 

Establish a Reference Sample

 

A practical quality-control method is to retain an approved printed or packaging sample.

 

The gloss level of this golden sample can be measured and recorded.

 

Future production can then be compared against the approved reference.

 

This can improve communication between:

 

Brand owner

 

Printer

 

Packaging supplier

 

QA/QC department

 

Production department

 

Instead of relying only on visual descriptions such as "high gloss" or "semi gloss," companies can establish measurable acceptance criteria.

 

Why a Wide 0–1000 GU Range?

 

Different packaging finishes can have very different reflective characteristics.

 

The Linshang LS196 provides a wide 0–1000 GU measurement range, offering flexibility when a company needs to inspect multiple types of surface finishes.

 

The wide range can also be useful for highly glossy and strongly reflective finished surfaces.

 

Use Multiple Measurement Points

 

For larger printed surfaces, it may be useful to take measurements at several locations.

 

For example:

 

Top → Measure

 

Centre → Measure

 

Bottom → Measure

 

This can help identify whether the coating or finishing process is uniform across the product.

 

For repetitive production inspection, the same measurement positions should be used whenever possible.

 

QC Mode for Routine Inspection

 

The LS196 provides a QC mode that can assist with repetitive quality inspection.

 

Once suitable upper and lower acceptance limits are established, production samples can be compared against those requirements.

 

This can help make inspection more consistent between different operators and production shifts.

 

Record and Analyse Measurement Data

 

The Linshang LS196 supports computer connection and measurement data transmission.

 

Results can be exported for further analysis and quality documentation.

 

This can help companies maintain:

 

Printing batch records

 

Supplier inspection records

 

Customer quality reports

 

Coating process records

 

Production comparison data

 

Historical gloss measurements

 

When a customer raises a quality issue, recorded measurements can also provide useful supporting information.

 

Reduce Disputes Between Customer and Supplier

 

Appearance-related complaints can be difficult because both parties may describe the same surface differently.

 

One person may consider the finish acceptable while another considers it too glossy.

 

Objective gloss measurements can provide a common reference for discussing the issue.

 

For regular supply contracts, both customer and supplier can establish an agreed measurement procedure and acceptable gloss range.

 

Gloss Measurement Standards

 

The Linshang LS196 is designed according to recognised gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

ASTM D2457

 

DIN 67530

 

The applicable standard and measurement procedure should always be confirmed according to the material and customer's testing requirements.

 

Linshang LS196 for Printing and Packaging Companies in Malaysia

 

The LS196 can be useful for Malaysian printing companies, packaging manufacturers, coating companies and QA/QC departments that need objective surface-gloss measurements.

 

Its combination of 60° measurement geometry, wide 0–1000 GU range, QC mode and data-management capability makes it a versatile instrument for suitable industrial surface inspection applications.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection and QA/QC applications.

 

Contact us with details of your material and application, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

16 Aug 2026