Linshang LS196 Gloss Meter for Furniture and Wood Coating Inspection Malaysia

Linshang LS196 Gloss Meter for Furniture and Wood Coating Inspection Malaysia

 

Surface finish plays an important role in the appearance and perceived quality of furniture, wooden panels and coated wood products.

 

Two furniture panels may use the same colour and coating system but still look different because of variations in surface gloss.

 

The Linshang LS196 Gloss Meter provides a numerical method for evaluating gloss, helping manufacturers move from subjective visual inspection to measurable Gloss Unit (GU) values.

 

With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 can be used for many furniture and wood-coating quality-control applications.

 

Why Measure Gloss on Furniture?

 

Furniture surfaces are commonly finished with coatings, lacquers, paints, laminates or other decorative treatments.

 

The final gloss level can be affected by:

 

Coating formulation

 

Spray application

 

Coating thickness

 

Drying conditions

 

Curing temperature

 

Sanding

 

Polishing

 

Surface preparation

 

Raw material variation

 

Production parameters

 

If these conditions change, the finished product may have a different appearance.

 

A gloss meter helps manufacturers detect and quantify these differences.

 

Applications in Furniture Manufacturing

 

The Linshang LS196 can be used for suitable surfaces such as:

 

Wooden furniture

 

Painted furniture

 

Lacquered panels

 

MDF panels

 

Decorative boards

 

Cabinet doors

 

Tables

 

Office furniture

 

Kitchen cabinets

 

Laminated panels

 

High-gloss furniture

 

Coated wood products

 

It can be incorporated into incoming inspection, production QC and final inspection procedures.

 

High-Gloss Furniture Inspection

 

Modern furniture designs often use highly glossy finishes.

 

High-gloss cabinet doors, decorative panels and premium furniture surfaces can be strongly reflective.

 

One of the main advantages of the LS196 is its 0–1000 GU measurement range.

 

This wide range provides additional flexibility when measuring highly glossy surfaces as well as conventional finishes.

 

Compare Different Production Batches

 

Imagine a furniture manufacturer producing hundreds of cabinet doors.

 

The first batch is produced this week and the next batch two weeks later.

 

Even when the same paint colour is used, differences in coating, curing or polishing can result in a noticeable gloss variation.

 

The LS196 can be used to measure and compare both batches.

 

This gives QA/QC personnel numerical information instead of relying only on visual judgement.

 

Check Different Panels Before Assembly

 

Gloss consistency becomes particularly important when several panels are installed next to each other.

 

For example, a kitchen cabinet may include multiple doors.

 

If one door has a noticeably different gloss level, customers may see the difference immediately after installation.

 

Manufacturers can measure individual panels before assembly to identify unusual variations.

 

Establish a Golden Sample

 

A practical approach to furniture quality control is to maintain an approved golden sample.

 

The gloss level of the approved surface can be measured and recorded.

 

Future production can then be compared against the established reference.

 

This is useful when communicating requirements between:

 

Production

 

QA/QC

 

Suppliers

 

Subcontractors

 

Customers

 

Instead of saying "make it the same gloss," the company can work with measurable GU values.

 

Check Before and After Polishing

 

For polished furniture surfaces, gloss measurement can help evaluate the effectiveness of the finishing process.

 

A simple procedure can be:

 

Before polishing → Measure

 

After polishing → Measure

 

Final inspection → Measure again

 

The recorded values can help determine whether the polishing process is producing consistent results.

 

QC Mode for Production Inspection

 

The Linshang LS196 provides a QC mode.

 

Once appropriate acceptance limits have been established, production samples can be evaluated against those limits.

 

This can be particularly useful for factories performing repetitive inspection of large production quantities.

 

Troubleshooting Gloss Differences

 

If furniture panels show inconsistent gloss readings, investigate factors such as:

 

Different coating batches

 

Uneven spray application

 

Different curing conditions

 

Surface contamination

 

Sanding differences

 

Polishing differences

 

Different substrates

 

Measurement position

 

The gloss meter does not identify the cause automatically, but it provides objective data that helps production teams investigate the process.

 

Data Recording for Furniture QA/QC

 

The LS196 supports computer connection and measurement data transmission.

 

Results can be exported for further analysis and documentation.

 

This can help furniture manufacturers maintain:

 

Production batch records

 

Supplier inspection records

 

Customer quality reports

 

Process-control data

 

Historical gloss measurements

 

Historical records can also help identify gradual changes in production quality.

 

Gloss Measurement Standards

 

The Linshang LS196 is designed according to recognised gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

ASTM D2457

 

DIN 67530

 

Users should follow the measurement geometry and test method specified by their particular customer, product or applicable standard.

 

Linshang LS196 for Furniture Manufacturers in Malaysia

 

The LS196 can be useful for Malaysian furniture manufacturers, woodworking factories, cabinet manufacturers, coating companies and QA/QC departments that need a more objective way to evaluate surface appearance.

 

Its combination of 60° measurement geometry, 0–1000 GU range, QC mode and data-management capability makes it suitable for both routine inspection and high-gloss furniture applications.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection and QA/QC applications.

 

Contact us with your furniture, coating or surface application, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

16 Aug 2026