Linshang LS196 Gloss Meter for Powder Coating Quality Control Malaysia

Linshang LS196 Gloss Meter for Powder Coating Quality Control Malaysia

 

Powder coating is widely used on metal components because it provides a durable and attractive surface finish. Besides coating thickness, adhesion and colour, surface gloss can also be an important quality-control parameter.

 

The Linshang LS196 Gloss Meter provides an objective method for measuring powder-coated surface gloss in Gloss Units (GU).

 

With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 is suitable for routine industrial QC as well as highly glossy coated surfaces.

 

Why Measure Gloss on Powder Coating?

 

Two powder-coated components may have the same colour but still look different because their gloss levels are not identical.

 

Gloss variation can be caused by:

 

Powder formulation

 

Coating thickness

 

Oven temperature

 

Curing time

 

Surface preparation

 

Application conditions

 

Spray settings

 

Powder storage conditions

 

Production batch variation

 

For manufacturers, measuring gloss helps turn surface appearance into a controllable production parameter.

 

Applications for Powder Coating Companies

 

The Linshang LS196 can be used for suitable powder-coated products such as:

 

Metal cabinets

 

Electrical enclosures

 

Automotive components

 

Machinery parts

 

Furniture frames

 

Aluminium products

 

Steel panels

 

Industrial equipment

 

Architectural components

 

Consumer products

 

It can be used for incoming inspection, production monitoring and final quality control.

 

Check Batch-to-Batch Consistency

 

Imagine a factory producing the same powder-coated enclosure every month.

 

The colour code remains unchanged, but a new batch appears slightly more glossy than the previous batch.

 

Visual inspection may identify the difference, but it cannot quantify how large that difference is.

 

A gloss meter allows QA/QC personnel to record the GU values from both batches and compare them objectively.

 

Monitor the Curing Process

 

Curing conditions can influence the final appearance of powder coating.

 

Changes in oven temperature, curing time or production conditions may affect the finished surface.

 

Regular gloss measurement can provide additional data when investigating process changes.

 

If gloss readings suddenly shift after a production adjustment, the QA/QC team has a measurable indication that something in the process may have changed.

 

Establish an Approved Reference Sample

 

A useful quality-control approach is to retain an approved powder-coated component as a golden sample.

 

Measure its gloss and establish an acceptable range according to the company's quality requirements.

 

Future production can then be compared against this reference.

 

This helps communication between:

 

Powder supplier

 

Coating contractor

 

Production department

 

QA/QC department

 

Customer

 

Instead of saying a surface is "too glossy" or "too matt," both parties can discuss actual measurement values.

 

Why the 0–1000 GU Range Is Useful

 

Powder coatings are available in many finishes, from relatively low-gloss surfaces to highly glossy coatings.

 

The Linshang LS196 provides a wide 0–1000 GU measurement range, giving manufacturers flexibility when inspecting different surface finishes.

 

This can be useful for companies handling many product types instead of purchasing an instrument for only one specific gloss level.

 

Measure Several Points

 

For larger powder-coated components, one measurement may not represent the entire surface.

 

A practical QC procedure can include several predefined points.

 

For example:

 

Top → Measure

 

Centre → Measure

 

Bottom → Measure

 

The readings can then be compared to identify possible coating or curing variation across the component.

 

QC Mode for Routine Production Inspection

 

The LS196 provides a QC mode that can assist with repetitive inspection.

 

Once suitable acceptance limits have been established, production samples can be checked against those requirements.

 

This can improve inspection consistency, particularly when different operators are responsible for QC at different times.

 

Gloss Meter and Coating Thickness Gauge

 

A gloss meter and coating thickness gauge perform different measurements.

 

A gloss meter measures surface gloss and reports the result in GU.

 

A coating thickness gauge measures the thickness of a coating on a suitable substrate.

 

For powder coating quality control, both measurements can be useful.

 

A component can have acceptable coating thickness but still have an incorrect gloss level because of differences in formulation, curing or surface condition.

 

Therefore, gloss and coating thickness should not be treated as the same quality parameter.

 

Record Production Data

 

The Linshang LS196 supports computer connection and measurement data transmission.

 

Measurement results can be exported for further processing and analysis.

 

This allows QA/QC departments to maintain records for:

 

Production batches

 

Powder suppliers

 

Different colours or formulations

 

Oven conditions

 

Customer specifications

 

Process improvements

 

Quality investigations

 

Historical measurement data can make troubleshooting much easier when production conditions change.

 

Recognised Gloss Measurement Standards

 

The Linshang LS196 is designed according to recognised gloss measurement standards including:

 

ISO 2813

 

ASTM D523

 

ASTM D2457

 

DIN 67530

 

For formal testing requirements, users should always confirm the applicable standard and required measurement procedure.

 

Linshang LS196 for Powder Coating Companies in Malaysia

 

For Malaysian powder coating companies, metal fabricators, automotive component manufacturers and QA/QC departments, the Linshang LS196 provides a practical way to quantify surface gloss.

 

Its combination of 60° measurement, 0–1000 GU range, QC functionality and data management capability makes it suitable for both routine production inspection and high-gloss coating applications.

 

Looking for Linshang LS196 Gloss Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for industrial manufacturing and QA/QC applications.

 

Contact us with details of your powder-coated product and measurement requirement, and our team can assist you in selecting a suitable gloss measurement solution.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

16 Aug 2026