Linshang LS196 Gloss Meter for Incoming Quality Control and Supplier Inspection Malaysia
Linshang LS196 Gloss Meter for Incoming Quality Control and Supplier Inspection Malaysia
Incoming Quality Control (IQC) is an important part of manufacturing quality management. If painted, coated, plastic or finished components arrive with inconsistent surface gloss, the problem may only become obvious after assembly or when the finished product reaches the customer.
The Linshang LS196 Gloss Meter provides QA/QC teams with an objective method for checking surface gloss during incoming inspection.
With a 60° measurement angle and wide 0–1000 GU measurement range, the LS196 can be used for many general and high-gloss industrial surfaces.
Why Include Gloss Measurement in IQC?
Incoming inspection commonly focuses on:
Dimensions
Colour
Material
Quantity
Coating thickness
Surface defects
Workmanship
However, surface gloss may also be an important acceptance criterion.
Two components can have the correct colour but still appear different because their gloss levels are not the same.
This becomes particularly noticeable when components from different suppliers are assembled next to each other.
What Incoming Materials Can Be Checked?
Depending on the material and applicable measurement requirement, the LS196 can be used for suitable surfaces such as:
Painted components
Coated metal
Plastic parts
Automotive components
Electroplated parts
Furniture panels
Ceramic products
Decorative components
Polished surfaces
Finished industrial parts
This makes gloss measurement relevant to many manufacturing sectors.
Compare Different Suppliers
Suppose three suppliers provide the same coated component.
Visually, all three samples may appear acceptable when inspected separately.
However, gloss measurements may show differences between:
Supplier A → Reference
Supplier B → Compare
Supplier C → Compare
This gives the purchasing and QA/QC departments objective data for supplier evaluation.
Establish an Approved Supplier Specification
Instead of telling suppliers that a product should be "glossy" or "not too shiny," manufacturers can establish an acceptable gloss range.
An approved golden sample can be measured first.
Once suitable acceptance limits have been determined, incoming batches can be checked against the same reference.
This creates clearer communication between buyer and supplier.
Detect Supplier Process Changes
A supplier may change:
Raw materials
Paint formulation
Coating process
Polishing process
Mold
Production equipment
Subcontractor
Curing conditions
These changes may affect surface gloss even if the supplier continues using the same product description.
Regular incoming gloss measurements can help identify changes that might otherwise go unnoticed.
Why the LS196 0–1000 GU Range Is Useful
Different suppliers and materials can have very different gloss levels.
The Linshang LS196 provides a wide 0–1000 GU measurement range, making it useful for companies inspecting multiple types of surface finishes.
This is particularly valuable when incoming components include highly glossy or strongly reflective surfaces.
Use QC Mode for Faster Incoming Inspection
Incoming inspection often involves repetitive measurements.
The LS196 provides a QC mode that can help users evaluate measurements against established limits.
Once appropriate criteria are defined, IQC personnel can quickly determine whether incoming products meet the required gloss specification.
This can make inspection more systematic.
Create an Incoming Gloss Inspection Procedure
A simple IQC procedure can include:
Step 1 – Identify the Batch
Record the supplier, purchase order and batch information.
Step 2 – Clean the Measurement Area
Ensure that dust, fingerprints or contamination do not affect the reading.
Step 3 – Check the Instrument
Verify the instrument and perform calibration according to the manufacturer's recommended procedure when required.
Step 4 – Measure Defined Locations
Use consistent measurement points on each sample.
Step 5 – Compare With the Specification
Compare the GU readings against the approved reference or acceptance limits.
Step 6 – Record the Result
Keep the measurement together with the supplier and batch information.
Build Supplier Quality Data Over Time
One measurement tells you about one sample.
Repeated measurements over several months can tell you much more about the supplier.
By recording gloss data, companies can identify:
Stable suppliers
Suppliers with frequent variation
Gradual process changes
Batch-to-batch inconsistency
Recurring quality problems
This information can support future supplier reviews and purchasing decisions.
Data Recording and Traceability
The LS196 supports computer connection and measurement data transmission.
Measurement results can be exported for further processing and analysis.
This is useful for maintaining:
Supplier inspection records
Incoming batch records
Quality reports
Customer documentation
Corrective-action investigations
Historical measurement trends
When a supplier-quality issue occurs, recorded data provides a stronger basis for discussion than visual opinions alone.
Reduce Quality Disputes With Suppliers
Surface appearance disputes are difficult when both parties rely only on eyesight.
A supplier may say:
"The finish is the same as before."
The customer may say:
"This batch looks different."
A defined gloss measurement procedure provides objective numerical data that both parties can discuss.
This can improve supplier communication and reduce unnecessary arguments about subjective appearance.
Recognised Gloss Measurement Standards
The Linshang LS196 is designed according to recognised gloss measurement standards including:
ISO 2813
ASTM D523
ASTM D2457
DIN 67530
For formal supplier specifications, companies should clearly define the required test method, measurement geometry and acceptance criteria.
Linshang LS196 for Malaysian Manufacturers
The LS196 can be useful for Malaysian manufacturers that purchase painted, coated, plastic, polished or finished components from local and overseas suppliers.
Its combination of 60° measurement, 0–1000 GU range, QC mode and data-management capability makes it suitable for structured incoming quality-control programs.
Looking for Linshang LS196 Gloss Meter in Malaysia?
MTM Precision supplies professional testing and measurement instruments for manufacturing, industrial inspection, IQC and QA/QC applications.
Contact us with details of the material you need to inspect, and our team can assist you in selecting a suitable gloss measurement solution.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026