Myzox AST-10 for Asphalt Road Resurfacing and Overlay Works Malaysia

Myzox AST-10 for Asphalt Road Resurfacing and Overlay Works Malaysia

 

Road resurfacing and asphalt overlay projects require contractors to manage material delivery, paving and compaction efficiently. Throughout these operations, asphalt temperature can be monitored as part of the project's construction and quality-control procedures.

 

The Myzox AST-10 Digital Asphalt Thermometer is designed for pavement temperature control and provides a practical solution for contractors involved in asphalt resurfacing, overlay and road rehabilitation works in Malaysia.

 

Used with the Myzox SE-IN 200 mm needle probe, the AST-10 allows direct penetration temperature measurement within asphalt material.

 

What Is Asphalt Road Resurfacing?

 

Road resurfacing generally involves renewing the upper pavement surface by placing new asphalt over a prepared road.

 

Depending on the project, the work may involve:

 

Removal or milling of deteriorated pavement

 

Surface preparation

 

Tack coat application

 

Hot mix asphalt delivery

 

Asphalt paving

 

Compaction

 

Final inspection

 

Resurfacing can extend the serviceability of an existing road without completely reconstructing the entire pavement structure.

 

What Is an Asphalt Overlay?

 

An asphalt overlay involves placing a new layer of asphalt over an existing pavement or prepared surface.

 

Overlay works are commonly used for:

 

Road rehabilitation

 

Highway maintenance

 

Urban road upgrading

 

Industrial roads

 

Access roads

 

Car parks

 

Residential roads

 

Commercial developments

 

Because hot asphalt is involved, temperature monitoring may form part of the construction QA/QC process.

 

Why Monitor Temperature During Resurfacing?

 

Hot mix asphalt begins losing heat after production and continues cooling during transportation and paving.

 

The rate of cooling can be affected by:

 

Transportation distance

 

Waiting time

 

Weather

 

Wind

 

Rain

 

Existing pavement temperature

 

Asphalt layer thickness

 

Paving speed

 

Site delays

 

Temperature measurement gives the site team an actual reading instead of relying only on elapsed time or visual observation.

 

Myzox AST-10 for Asphalt Temperature Checking

 

The AST-10 is compatible with Type-K thermocouple probes.

 

Its main instrument supports a Type-K measurement range of:

 

-200掳C to +1,370掳C

 

The actual usable temperature range depends on the probe connected.

 

For asphalt penetration measurement, the AST-10 can be used with the SE-IN Needle Probe.

 

200 mm Needle Probe for Asphalt

 

The Myzox SE-IN has a probe length of approximately:

 

200 mm

 

Its specified measurement range is:

 

-50掳C to +650掳C

 

Myzox identifies the SE-IN probe as suitable for asphalt measurement.

 

The penetration design allows contractors to measure temperature within the asphalt instead of checking only the exposed surface.

 

Where Can Temperature Be Checked During Resurfacing?

 

Depending on project requirements, contractors may perform temperature measurements at several stages.

 

Asphalt Delivery

 

Temperature can be checked when hot mix asphalt arrives at the resurfacing site.

 

Before Placement

 

Additional checks may be performed before the material enters the paving operation.

 

Behind the Paver

 

Freshly placed asphalt can be checked at selected locations.

 

Before Compaction

 

Temperature measurements can provide useful information before rolling operations.

 

During Compaction

 

Further measurements may be performed as the asphalt continues to cool.

 

The required locations and measurement frequency should follow the approved project procedure.

 

Why Penetration Measurement Matters

 

The temperature of an exposed asphalt surface may differ from the temperature within the layer.

 

Surface cooling can be influenced directly by wind, air temperature and moisture.

 

A penetration probe makes direct contact with the asphalt beneath the immediate surface.

 

For contractors who need this type of measurement, the AST-10 with SE-IN 200 mm probe is particularly relevant.

 

Can AST-10 Measure Surface Temperature?

 

The AST-10 can also support contact surface temperature measurement when paired with the optional Myzox SE-SU Surface Probe.

 

The SE-SU has a specified range of:

 

-20掳C to +400掳C

 

This gives users a choice between penetration and surface contact measurement depending on the application.

 

Data Hold for Road Site Measurements

 

The AST-10 includes a Data Hold function.

 

This allows the displayed temperature value to be retained after taking a measurement.

 

For resurfacing projects where technicians are moving between multiple measurement locations, Data Hold can make reading and recording results more convenient.

 

MAX and MIN Measurement

 

The AST-10 also provides:

 

MAX measurement

 

MIN measurement

 

Relative measurement mode

 

These functions provide additional flexibility when monitoring changing temperatures during asphalt work.

 

Using AST-10 for Pavement Rehabilitation

 

Pavement rehabilitation projects may involve more than simple resurfacing.

 

Depending on pavement condition, work may include:

 

Local repair

 

Milling

 

Asphalt replacement

 

Overlay

 

Shoulder repair

 

Junction rehabilitation

 

Road widening

 

Whenever hot asphalt is placed, temperature measurement may be required according to the project's construction specification.

 

A portable thermometer allows field teams to perform checks directly at the work location.

 

Using AST-10 for Night Road Works

 

Some road resurfacing operations are carried out at night to reduce traffic disruption.

 

Night work can introduce different environmental conditions compared with daytime paving.

 

Ambient temperature and wind conditions may change, affecting the rate at which asphalt loses heat.

 

Actual temperature measurement can therefore provide useful information during night paving operations.

 

Using AST-10 for Car Park Resurfacing

 

The AST-10 is not limited to public highways.

 

It can also be considered for asphalt works involving:

 

Shopping centre car parks

 

Factory compounds

 

Warehouse yards

 

Commercial buildings

 

Residential developments

 

Private roads

 

Industrial facilities

 

The same basic temperature measurement principle applies whenever hot asphalt is being placed and compacted.

 

QA/QC Records for Asphalt Overlay Works

 

Contractors may document temperature readings together with other project information.

 

A field record may include:

 

Date

 

Time

 

Project location

 

Road section

 

Asphalt batch

 

Truck identification

 

Measurement location

 

Temperature

 

Paving stage

 

Weather condition

 

Technician

 

Remarks

 

This helps create traceable records for the resurfacing operation.

 

FAQ: Is Myzox AST-10 Suitable for Asphalt Overlay?

 

Yes.

 

The AST-10 is designed for pavement temperature control, and its SE-IN 200 mm needle probe is suitable for asphalt measurement.

 

It can therefore be used for temperature checking during asphalt overlay and resurfacing work where penetration measurements are required.

 

FAQ: Can AST-10 Be Used During Night Paving?

 

Yes.

 

The AST-10 is a portable digital thermometer and can be used during road works carried out at different times of day, subject to appropriate site safety and operating procedures.

 

FAQ: Can AST-10 Measure Asphalt After It Has Been Laid?

 

Yes.

 

The SE-IN penetration probe can be used to measure temperature within asphalt at an appropriate measurement point after placement, according to the project's approved measurement procedure.

 

FAQ: Is AST-10 Only for Highway Contractors?

 

No.

 

Potential users include road contractors, civil engineering companies, asphalt paving contractors, maintenance teams, property contractors and organisations responsible for private roads or car parks.

 

Digital Asphalt Thermometer for Road Resurfacing Malaysia

 

Road resurfacing may appear simpler than constructing a completely new road, but contractors still need appropriate field measurements and quality-control procedures.

 

Temperature monitoring provides measurable information about hot asphalt during delivery, paving and compaction.

 

The Myzox AST-10 Digital Asphalt Thermometer with SE-IN 200 mm needle probe provides a practical solution for penetration temperature measurement during asphalt resurfacing and overlay projects in Malaysia.

 

Myzox Authorized Distributor in Malaysia

 

MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia, supplying Myzox surveying, construction and civil engineering instruments.

 

Contact MTM Precision for product information, quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer in Malaysia.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact us for Myzox AST-10 Digital Asphalt Thermometer Malaysia, asphalt resurfacing equipment, pavement temperature measurement and road construction instruments.


 

16 Aug 2026