Myzox AST-10 for Pothole Repair and Asphalt Patching Works Malaysia
Myzox AST-10 for Pothole Repair and Asphalt Patching Works Malaysia
Pothole repair and asphalt patching may involve smaller quantities of asphalt than major highway construction, but temperature measurement can still be important when hot mix asphalt is used.
The Myzox AST-10 Digital Asphalt Thermometer provides road maintenance contractors, civil engineering teams and site technicians with a practical solution for checking asphalt temperature during patching and pavement repair work in Malaysia.
Designed for pavement temperature control, the AST-10 can be used with the Myzox SE-IN 200 mm needle probe for direct penetration temperature measurement within asphalt.
Why Does Temperature Matter During Asphalt Patching?
Hot asphalt begins cooling after it leaves the production plant.
During smaller repair jobs, additional delays can occur while crews prepare the damaged pavement, manage traffic or wait for equipment.
Factors affecting asphalt temperature may include:
Transportation time
Waiting time
Ambient temperature
Wind
Rain and moisture
Size of the asphalt load
Repair area
Existing pavement condition
Time before compaction
Direct temperature measurement gives the maintenance team actual information about the asphalt at the time of repair.
Where Is Asphalt Patching Commonly Used?
Asphalt patching is used in many locations, including:
Public roads
Highways
Residential streets
Factory compounds
Industrial roads
Warehouse yards
Car parks
Access roads
Commercial properties
Construction sites
This means asphalt temperature equipment is relevant not only to major highway contractors but also to smaller road maintenance teams.
Myzox AST-10 for Road Repair
The Myzox AST-10 is compatible with Type-K thermocouple probes.
The main instrument supports Type-K temperature measurement from:
-200掳C to +1,370掳C
The actual usable measurement range depends on the probe connected to the instrument.
For asphalt penetration measurement, the SE-IN Needle Probe is particularly relevant.
200 mm Asphalt Penetration Probe
The Myzox SE-IN provides:
Probe length: 200 mm
Temperature range: -50掳C to +650掳C
Type: Penetration needle probe
Myzox identifies the SE-IN as suitable for asphalt measurement.
The probe can be inserted into the hot asphalt at an appropriate measurement point, allowing the technician to check temperature within the material rather than relying only on the exposed surface.
When Can Temperature Be Checked During Pothole Repair?
Depending on the repair procedure, temperature can potentially be checked at several stages.
When Asphalt Arrives
The maintenance team can check the hot mix asphalt after transportation to the repair location.
Before Placement
A reading may be taken before the material is placed into the prepared repair area.
After Placement
Temperature can be checked after the asphalt has been placed.
Before Compaction
A further measurement may be performed before rolling or other compaction operations.
The actual measurement procedure should always follow the relevant project specification and method statement.
Why Not Rely Only on Asphalt Appearance?
Experienced workers may visually assess asphalt during repair, but appearance cannot provide an exact temperature value.
A digital thermometer gives the technician a numerical reading.
This makes it possible to record actual temperature information as part of the repair or maintenance documentation.
Why Penetration Measurement Can Be Useful
The exposed asphalt surface is affected directly by air, wind and weather.
Material beneath the surface can be at a different temperature.
A penetration probe allows direct contact measurement within the asphalt.
For patching work involving hot asphalt, the Myzox SE-IN 200 mm needle probe provides this capability.
Road Maintenance in Changing Weather
Road repair teams may work under changing environmental conditions.
In Malaysia, sudden rain and varying weather can affect site operations.
Actual temperature measurement helps the crew understand the asphalt condition at the time of work rather than estimating it solely from elapsed time.
Data Hold Function
The AST-10 provides a Data Hold function.
Once the temperature has been measured, the displayed value can be retained.
This is useful when technicians need to move away from the measurement location before recording the result.
MAX and MIN Functions
The instrument also provides:
MAX measurement
MIN measurement
Relative measurement mode
These functions offer additional flexibility when checking temperatures at multiple repair locations.
Can AST-10 Measure Asphalt Surface Temperature?
Yes, when used with an appropriate probe.
The optional Myzox SE-SU Surface Probe provides contact surface temperature measurement from:
-20掳C to +400掳C
For penetration measurement, the SE-IN needle probe is the more appropriate choice.
Using AST-10 for Car Park Repair
Potholes and deteriorated asphalt are also common in car parks.
Potential applications include:
Shopping mall car parks
Office buildings
Factories
Warehouses
Hotels
Residential developments
Commercial properties
Maintenance contractors performing hot asphalt repairs in these areas can use the same temperature measurement approach as road repair teams.
Using AST-10 for Factory and Industrial Roads
Heavy vehicles and frequent traffic can cause deterioration of industrial roads and loading areas.
Asphalt repair may therefore be required at:
Factories
Logistics centres
Ports
Warehouses
Industrial estates
Distribution centres
The AST-10 provides a portable thermometer that can be carried between different maintenance locations.
QA/QC Records for Asphalt Repair
Even smaller repair projects may benefit from basic documentation.
Temperature readings can be recorded together with:
Date
Time
Repair location
Asphalt temperature
Measurement stage
Weather condition
Technician
Remarks
For larger maintenance contracts, these records can support more systematic QA/QC documentation.
FAQ: Can Myzox AST-10 Be Used for Pothole Repair?
Yes.
When hot asphalt temperature measurement is required, the AST-10 with SE-IN penetration probe can be used as part of the road repair inspection process.
FAQ: Is AST-10 Only for New Road Construction?
No.
The instrument can also be used for:
Pothole repair
Asphalt patching
Road resurfacing
Pavement rehabilitation
Car park maintenance
Industrial road repair
Its application extends beyond new highway construction.
FAQ: What Is the Temperature Range of the Asphalt Probe?
The Myzox SE-IN needle probe has a specified range of:
-50掳C to +650掳C
The probe is approximately 200 mm long and suitable for asphalt measurement.
FAQ: Does AST-10 Tell Me Whether the Asphalt Is Ready for Compaction?
The AST-10 measures temperature.
The required compaction temperature should be determined according to the asphalt mix, project specification and approved construction procedure.
The thermometer provides actual temperature information that can be compared against those requirements.
Asphalt Thermometer for Road Maintenance Malaysia
Road maintenance quality depends on more than the size of the repair.
Whether contractors are resurfacing several kilometres of highway or repairing a smaller pothole, hot asphalt temperature can still be an important measurement.
The Myzox AST-10 Digital Asphalt Thermometer with SE-IN 200 mm needle probe provides a portable solution for temperature checking during pothole repair, asphalt patching and pavement maintenance work.
Myzox Authorized Distributor in Malaysia
MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia, supplying Myzox equipment for surveying, road construction, civil engineering and pavement maintenance applications.
Contact MTM Precision for product information, quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact us for Myzox AST-10 Digital Asphalt Thermometer Malaysia, pothole repair equipment, asphalt patching tools and road maintenance instruments.
16 Aug 2026