Asphalt Temperature QA/QC Checklist Using Myzox AST-10 for Road Construction Malaysia

Asphalt Temperature QA/QC Checklist Using Myzox AST-10 for Road Construction Malaysia

 

Asphalt temperature monitoring can form an important part of QA/QC procedures during road construction, highway paving, resurfacing and pavement maintenance.

 

A structured checklist helps site engineers and technicians perform temperature measurements consistently and ensures that important information such as measurement location, time, asphalt batch and temperature reading is properly documented.

 

The Myzox AST-10 Digital Asphalt Thermometer, used with the SE-IN 200 mm needle probe, provides a practical solution for penetration temperature measurement during asphalt works in Malaysia.

 

Why Use an Asphalt Temperature Checklist?

 

Road paving involves several stages, from asphalt delivery to final compaction.

 

Temperature changes throughout this process.

 

A checklist can help the QA/QC team remember:

 

When to take measurements

 

Where measurements were taken

 

Which asphalt load was checked

 

What temperature was measured

 

Who performed the inspection

 

Whether follow-up action was required

 

The actual inspection requirements should always follow the project's approved specification, method statement and QA/QC plan.

 

Before Starting Asphalt Temperature Measurement

 

Before taking the first reading, check the measurement equipment.

 

A basic pre-use checklist can include:

 

[ ] AST-10 is available

 

[ ] Battery condition is satisfactory

 

[ ] Display is functioning

 

[ ] Type-K probe is connected correctly

 

[ ] Probe is free from obvious damage

 

[ ] Probe is suitable for the expected temperature

 

[ ] Measurement procedure has been confirmed

 

[ ] Required QA/QC documentation is available

 

A quick equipment check can reduce the risk of discovering a problem after paving operations have already started.

 

Check the Correct Probe

 

For asphalt penetration measurement, the Myzox SE-IN Needle Probe is particularly relevant.

 

Key specifications include:

 

Probe length: 200 mm

Measurement range: -50掳C to +650掳C

Application: Penetration temperature measurement, including asphalt

 

The AST-10 main instrument supports Type-K thermocouple measurements from:

 

-200掳C to +1,370掳C

 

However, the actual usable range depends on the probe.

 

Always follow the temperature limits of the connected probe.

 

Asphalt Delivery Temperature Checklist

 

When hot mix asphalt arrives at site, the QA/QC record may include:

 

[ ] Date

 

[ ] Arrival time

 

[ ] Truck identification

 

[ ] Asphalt batch or mix identification

 

[ ] Delivery location

 

[ ] Temperature measurement taken

 

[ ] Temperature recorded

 

[ ] Measurement point recorded

 

[ ] Weather or relevant site condition noted

 

[ ] Inspector identified

 

This creates a traceable record linking the temperature reading to a particular delivery.

 

Paving Temperature Checklist

 

During paving, additional measurements may be required.

 

A paving-stage checklist can include:

 

[ ] Paving location recorded

 

[ ] Road section or chainage recorded

 

[ ] Measurement time recorded

 

[ ] Appropriate measurement point selected

 

[ ] SE-IN probe inserted correctly

 

[ ] Reading allowed to stabilize

 

[ ] Temperature recorded

 

[ ] Any unusual condition noted

 

The number of measurements should be determined by the project's QA/QC requirements.

 

Before Compaction Checklist

 

Asphalt continues to cool after placement.

 

Before rolling or compaction, the site team may check:

 

[ ] Measurement location

 

[ ] Time since placement where relevant

 

[ ] Asphalt temperature

 

[ ] Road section

 

[ ] Weather condition

 

[ ] Relevant observations

 

[ ] Measurement compared with project requirement

 

The AST-10 measures the temperature.

 

It does not determine the required compaction temperature, which must come from the relevant project specification and approved procedure.

 

During Compaction Checklist

 

Where additional measurements are required during rolling, technicians may record:

 

[ ] Compaction stage

 

[ ] Measurement time

 

[ ] Measurement location

 

[ ] Asphalt temperature

 

[ ] Roller operation stage

 

[ ] Relevant observations

 

This can provide additional information about how the pavement temperature changes during compaction.

 

How to Take a Penetration Temperature Measurement

 

Always follow the project's approved testing and safety procedure.

 

A typical measurement sequence may be:

 

Connect the SE-IN probe to the AST-10.

 

Confirm that the instrument is operating normally.

 

Select the approved measurement location.

 

Insert the probe into the asphalt.

 

Allow the reading to stabilize.

 

Use Data Hold if necessary.

 

Record the temperature.

 

Remove the probe safely.

 

Repeat where required.

 

Consistency is important when comparing measurements from different locations.

 

Why Allow the Reading to Stabilize?

 

Inserting and immediately removing the probe may not provide a representative stabilized reading.

 

The thermocouple needs time to respond to the temperature of the asphalt.

 

Waiting for the display to stabilize helps improve the consistency of the measurement procedure.

 

Using the Data Hold Function

 

The AST-10 provides a Data Hold function.

 

This can be useful when the measurement location makes it difficult to write down the temperature immediately.

 

After obtaining a stable reading, the technician can retain the displayed value and record it safely.

 

Using MAX and MIN

 

The AST-10 also provides:

 

MAX measurement

 

MIN measurement

 

Relative measurement mode

 

These functions can provide additional information during repeated field temperature measurements.

 

Surface vs Penetration Measurement Checklist

 

Before measuring, ask:

 

Do we need surface temperature or temperature within the asphalt?

 

If penetration measurement is required, the SE-IN 200 mm needle probe is suitable for asphalt.

 

If contact surface temperature is required, the optional Myzox SE-SU Surface Probe can be considered.

 

Its specified measurement range is:

 

-20掳C to +400掳C

 

The measurement method should match the project's requirements.

 

Suggested Asphalt Temperature Record

 

A simple field record may contain:

 

Project:

Date:

Road / Location:

Chainage:

Asphalt Mix:

Truck / Batch:

Measurement Time:

Measurement Stage:

Temperature:

Weather Condition:

Inspector:

Remarks:

 

This type of structured record makes it easier to review measurements later.

 

Common QA/QC Mistakes to Avoid

 

During asphalt temperature inspection, avoid common mistakes such as:

 

Taking only one reading when multiple readings are required

 

Measuring at inconsistent locations

 

Removing the probe before stabilization

 

Using the wrong probe

 

Exceeding the probe's specified temperature range

 

Forgetting to record the measurement time

 

Failing to identify the asphalt load

 

Confusing surface and penetration measurements

 

Relying only on visual estimation

 

Good measurement equipment should be supported by a consistent field procedure.

 

Safety Checklist

 

Asphalt paving sites contain hot material and moving heavy machinery.

 

Personnel performing temperature measurements should remain aware of:

 

Asphalt trucks

 

Pavers

 

Rollers

 

Live traffic

 

Hot asphalt

 

Work-zone boundaries

 

Night-time visibility

 

Site communication

 

Never take a temperature measurement from an unsafe position.

 

Site safety requirements always take priority.

 

FAQ: What Should Be Recorded with an Asphalt Temperature Reading?

 

Useful information can include the date, time, location, asphalt batch, truck identification, measurement stage, temperature and inspector.

 

The exact documentation should follow the project's QA/QC requirements.

 

FAQ: How Often Should Asphalt Temperature Be Checked?

 

There is no single inspection frequency suitable for every project.

 

Measurement frequency should be determined by the applicable project specification, QA/QC plan and approved construction procedure.

 

FAQ: Can Myzox AST-10 Be Used for QA/QC?

 

Yes.

 

The AST-10 is designed for pavement temperature control, and the SE-IN 200 mm needle probe is suitable for asphalt measurement.

 

This makes it suitable for use as part of asphalt temperature QA/QC procedures.

 

FAQ: Does AST-10 Replace Other Asphalt Quality Tests?

 

No.

 

Temperature is only one aspect of asphalt quality control.

 

Other project-specific inspections and tests may still be required.

 

The AST-10 provides temperature measurement data as part of the broader QA/QC process.

 

A Practical Asphalt QA/QC Tool for Malaysian Contractors

 

A good asphalt temperature inspection process combines suitable measurement equipment with a consistent procedure and clear documentation.

 

The Myzox AST-10 Digital Asphalt Thermometer with SE-IN 200 mm needle probe provides a practical solution for penetration temperature measurement during asphalt delivery, paving and compaction.

 

For Malaysian road contractors, site engineers and QA/QC teams, it can become a useful part of the everyday road construction inspection toolkit.

 

Myzox Authorized Distributor in Malaysia

 

MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia, supplying Myzox surveying, civil engineering and road construction equipment.

 

Contact MTM Precision for product information, quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer in Malaysia.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact us for Myzox AST-10 Digital Asphalt Thermometer Malaysia, asphalt QA/QC equipment, pavement temperature measurement and road construction instruments.


 

16 Aug 2026