Myzox AST-10 Digital Asphalt Thermometer FAQ and Buying Guide Malaysia
Myzox AST-10 Digital Asphalt Thermometer FAQ and Buying Guide Malaysia
The Myzox AST-10 Digital Asphalt Thermometer is designed for pavement temperature control and provides a practical solution for road contractors, civil engineers and QA/QC teams that need to measure asphalt temperature during construction.
Used with the Myzox SE-IN 200 mm needle probe, the AST-10 can perform penetration temperature measurements within asphalt material.
This FAQ and buying guide answers common questions from Malaysian contractors considering the Myzox AST-10 for road paving, highway construction, resurfacing and pavement maintenance.
What Is the Myzox AST-10?
The Myzox AST-10 is a portable digital temperature measuring instrument compatible with Type-K thermocouple probes.
It is suitable for pavement temperature control and can be paired with different probes depending on the measurement application.
For asphalt measurement, the SE-IN needle probe is particularly relevant.
What Is the AST-10 Main Measurement Range?
The AST-10 main instrument supports Type-K thermocouple measurements from:
-200掳C to +1,370掳C
However, the actual usable temperature range depends on the connected probe.
Users should therefore check both the thermometer and probe specifications.
What Probe Is Used for Asphalt?
For asphalt penetration measurement, the Myzox SE-IN Needle Probe is used.
Key specifications include:
Probe length: 200 mm
Measurement range: -50掳C to +650掳C
Probe type: Penetration needle probe
Myzox identifies the SE-IN as suitable for asphalt measurement.
Why Is a 200 mm Probe Useful?
The 200 mm probe provides useful reach for penetration temperature measurement.
Instead of measuring only the exposed asphalt surface, the probe can make direct contact with material beneath the immediate surface.
The actual insertion depth should follow the applicable project procedure.
Can AST-10 Measure Hot Mix Asphalt?
Yes.
The SE-IN probe is suitable for asphalt measurement and has a specified temperature range from -50掳C to +650掳C.
This makes the AST-10 relevant to hot mix asphalt temperature monitoring during road construction.
Can AST-10 Be Used During Asphalt Delivery?
Yes.
Contractors can use the AST-10 to check asphalt temperature when hot mix asphalt arrives at the construction site, according to the project's approved QA/QC and safety procedures.
Delivery temperature records can be associated with truck or batch information where required.
Can AST-10 Be Used During Road Paving?
Yes.
Potential measurement stages include:
Asphalt delivery
Before placement
During paving
Behind the paver
Before compaction
During rolling
The actual measurement locations and frequency should follow the project's requirements.
Can AST-10 Be Used Before Asphalt Compaction?
Yes.
The AST-10 can provide an actual asphalt temperature reading before rolling.
The thermometer itself does not determine whether the asphalt is ready for compaction.
Required temperatures must be determined according to the asphalt mix, project specification and approved construction procedure.
Can AST-10 Be Used for Road Resurfacing?
Yes.
The AST-10 can be used for temperature monitoring during:
Asphalt overlay
Road resurfacing
Pavement rehabilitation
Highway maintenance
Road repair
It is suitable for both new construction and maintenance applications.
Can AST-10 Be Used for Pothole Repair?
Yes.
Where hot asphalt is used for pothole repair or patching, the AST-10 can provide penetration temperature measurements using the SE-IN probe.
This makes it useful for smaller maintenance works as well as major paving projects.
Can AST-10 Be Used for Car Park Paving?
Yes.
Potential applications include:
Shopping centre car parks
Factory car parks
Warehouse yards
Residential developments
Commercial properties
Private roads
The same asphalt temperature measurement principles can apply to these projects.
Can AST-10 Be Used for Factory and Industrial Roads?
Yes.
Factories, warehouses and logistics facilities often contain asphalt access roads, loading areas and parking zones.
The AST-10 can be used during new paving, resurfacing and repair operations where asphalt temperature measurement is required.
Can AST-10 Be Used for Night Road Works?
Yes.
The AST-10 is portable and can be used during night paving operations, subject to appropriate lighting, site safety and approved measurement procedures.
Actual temperature measurement can be particularly useful when environmental conditions change during overnight work.
Is AST-10 Better Than an Infrared Thermometer?
They perform different types of measurement.
An infrared thermometer generally measures exposed surface temperature without contact.
The AST-10 with SE-IN measures temperature by direct contact and penetration into the asphalt.
If the requirement is to measure within the asphalt material, the penetration probe is the more relevant method.
If surface temperature is required, a suitable surface measurement method should be selected.
Can AST-10 Measure Surface Temperature?
Yes, with the appropriate probe.
Myzox offers the optional SE-SU Surface Probe, with a measurement range of:
-20掳C to +400掳C
This allows contact surface temperature measurement.
What Other Probe Comes with the AST-10?
The AST-10 also supports the SE-WI Wire Probe, with a measurement range of:
-30掳C to +200掳C
Different probes allow the instrument to support different contact temperature measurement applications.
Does AST-10 Have Data Hold?
Yes.
The Data Hold function allows the displayed temperature reading to be retained.
This can make it easier for technicians to read and record measurements after taking the probe away from the measurement location.
Does AST-10 Have MAX and MIN?
Yes.
The AST-10 provides:
MAX measurement
MIN measurement
Data Hold
Relative measurement mode
These functions provide additional flexibility for field temperature monitoring.
Does AST-10 Automatically Record QA/QC Reports?
No.
The AST-10 provides temperature measurement functions.
Project information such as truck number, asphalt batch, chainage, location and inspector details should be documented separately according to the contractor's QA/QC system.
What Information Should Be Recorded?
A useful asphalt temperature record may include:
Project
Date
Time
Road section
Chainage
Asphalt mix
Truck number
Batch
Measurement location
Temperature
Weather
Inspector
Remarks
This provides context for each temperature measurement.
How Often Should Asphalt Temperature Be Measured?
There is no single frequency that applies to every road project.
The measurement frequency should follow:
Project specifications
QA/QC requirements
Approved method statements
Relevant construction procedures
The AST-10 provides the measurement capability, while the project requirements determine when and where readings should be taken.
What Temperature Should Hot Mix Asphalt Be?
The required temperature depends on the asphalt mix, material specification and construction procedure.
There is no single temperature value that should automatically be applied to every project.
The AST-10 measures the actual temperature so it can be compared against the applicable project requirement.
Does AST-10 Determine Pass or Fail?
No.
The AST-10 is a temperature measuring instrument.
It does not independently determine whether asphalt should be accepted, rejected, paved or compacted.
Those decisions should follow the project's approved specifications and responsible engineering personnel.
Who Should Buy the Myzox AST-10?
The AST-10 can be useful for:
Road contractors
Highway contractors
Asphalt paving companies
Civil engineering contractors
Infrastructure contractors
QA/QC engineers
Site engineers
Construction consultants
Road maintenance teams
Property maintenance contractors
Factory maintenance teams
Any organisation performing hot asphalt work may potentially benefit from portable temperature measurement equipment.
What Should I Check Before Buying an Asphalt Thermometer?
Consider the following questions:
Do you need surface or penetration measurement?
What temperature range is required?
What probe length is suitable?
Do you need interchangeable probes?
Do you require Data Hold?
Do you require MAX/MIN measurement?
Will the instrument be used regularly on construction sites?
Does your project specify a particular measurement method?
For penetration temperature measurement of asphalt, the AST-10 with SE-IN 200 mm probe is a practical option.
Why Choose Myzox AST-10?
Key advantages include:
Designed for pavement temperature control
Type-K thermocouple compatibility
200 mm SE-IN penetration probe
SE-IN range of -50掳C to +650掳C
Wide main instrument Type-K range
Data Hold
MAX/MIN
Relative measurement mode
Multiple probe options
Portable field use
These features make the AST-10 suitable for a wide range of road construction and pavement maintenance applications.
Where to Buy Myzox AST-10 in Malaysia?
Customers looking for the Myzox AST-10 Digital Asphalt Thermometer in Malaysia can contact MTM Precision for product information, quotation and availability.
MTM Precision supplies Myzox equipment for surveying, civil engineering, road construction and field measurement applications.
Myzox Authorized Distributor in Malaysia
MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia.
We support Malaysian contractors, engineers and construction companies looking for Myzox equipment for professional field applications.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact us for quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer Malaysia, asphalt temperature measurement equipment and other Myzox road construction instruments.
16 Aug 2026