Asphalt Temperature Testing Guide for Site Engineers Using Myzox AST-10 Malaysia
Asphalt Temperature Testing Guide for Site Engineers Using Myzox AST-10 Malaysia
Site engineers involved in road construction need reliable field information to monitor asphalt paving operations. One of the measurements commonly considered during hot mix asphalt work is temperature.
From delivery to placement and compaction, asphalt temperature changes continuously. Measuring it at appropriate stages provides numerical information that can support construction monitoring and QA/QC documentation.
The Myzox AST-10 Digital Asphalt Thermometer, combined with the SE-IN 200 mm needle probe, provides a practical solution for penetration temperature measurement during road construction projects in Malaysia.
Why Do Site Engineers Monitor Asphalt Temperature?
Hot mix asphalt begins losing heat after production.
Its temperature can continue changing during:
Production → Transportation → Delivery → Paving → Compaction
Site conditions can also influence cooling.
These may include:
Transportation distance
Waiting time
Ambient temperature
Wind
Rain
Existing pavement temperature
Asphalt layer thickness
Paving speed
Construction delays
Actual temperature measurement helps the site team understand the asphalt condition at the specific time and location of the inspection.
What Does an Asphalt Thermometer Actually Tell You?
An asphalt thermometer provides a numerical temperature reading.
It does not automatically determine:
Whether asphalt should be accepted
Whether paving should proceed
Whether rolling should start
Whether the pavement passes QA/QC requirements
Those decisions must be based on the project's applicable specifications, asphalt mix requirements and approved procedures.
The thermometer provides measurement data that supports those decisions.
Myzox AST-10 for Site Engineers
The Myzox AST-10 is designed for pavement temperature control and supports Type-K thermocouple probes.
The main instrument supports a Type-K measurement range of:
-200°C to +1,370°C
The usable measurement range depends on the probe connected to the instrument.
For asphalt penetration measurement, the SE-IN Needle Probe is particularly relevant.
SE-IN 200 mm Needle Probe
The SE-IN offers:
Probe length: 200 mm
Measurement range: -50°C to +650°C
Probe type: Penetration thermocouple probe
Myzox identifies the SE-IN as suitable for asphalt measurement.
This allows site personnel to insert the probe into asphalt and measure temperature within the material.
Step 1: Check the Instrument Before Paving Starts
Before the paving operation begins, check the thermometer and probe.
Site personnel can confirm that:
The AST-10 powers on correctly
The display is functioning
The Type-K probe is connected securely
The probe and cable show no obvious damage
The battery condition is suitable
The correct probe is being used
Performing a simple pre-use check can help avoid interruptions later.
Step 2: Confirm the Project Requirements
Before measuring asphalt temperature, understand what the project requires.
Confirm:
Measurement method
Measurement locations
Inspection frequency
Required records
Applicable temperature criteria
Responsible personnel
Do not assume that the same procedure applies to every road project.
Step 3: Check Asphalt at Delivery
One possible inspection point is when hot mix asphalt arrives at site.
Temperature can be measured and recorded together with information such as:
Truck number
Asphalt batch
Arrival time
Measurement time
Mix identification
Weather conditions
This creates a clearer record of the material condition after transportation.
Step 4: Check During Paving
Additional temperature measurements may be performed as paving progresses.
Site engineers may require readings from selected road sections or paving locations according to the QA/QC plan.
Recording the location is important because a temperature value without context may be difficult to interpret later.
Step 5: Check Before Compaction
Asphalt continues cooling after placement.
A temperature reading before rolling can provide useful information about the material condition at that stage.
The measured temperature should be assessed against the project's applicable requirements.
Step 6: Repeat Measurements Where Required
One temperature measurement may not represent an entire road section.
Depending on project requirements, measurements may need to be repeated across:
Different truck loads
Different paving locations
Different times
Different road sections
Different compaction stages
Consistent measurement procedures make these readings more useful for comparison.
Step 7: Allow the Reading to Stabilize
When performing penetration measurement, do not immediately remove the probe after insertion.
Allow sufficient time for the displayed value to stabilize.
Once a stable reading is obtained, record the temperature according to the project's documentation procedure.
Using Data Hold
The Myzox AST-10 provides a Data Hold function.
This allows the displayed value to remain visible after measurement.
For site engineers and technicians working around active paving operations, Data Hold can make recording measurements more convenient.
Using MAX and MIN
The AST-10 also provides:
MAX measurement
MIN measurement
Relative measurement mode
These functions offer additional flexibility during repeated temperature measurements.
Surface Temperature vs Penetration Temperature
Site engineers should understand the difference.
An infrared thermometer generally measures the exposed asphalt surface.
The AST-10 with SE-IN measures temperature by direct penetration into the material.
Surface and internal temperatures may differ because the exposed surface is affected directly by environmental conditions.
The measurement method should therefore match the project requirement.
Can AST-10 Measure Surface Temperature?
Yes, with an appropriate probe.
The optional Myzox SE-SU Surface Probe has a specified range of:
-20°C to +400°C
This allows contact surface temperature measurement.
The SE-IN is the relevant probe when penetration measurement is required.
Suggested Asphalt Temperature Field Record
Site engineers may consider recording:
Project:
Date:
Time:
Road / Section:
Chainage:
Asphalt Mix:
Truck / Batch:
Measurement Stage:
Measurement Location:
Temperature:
Weather:
Inspector:
Remarks:
The exact record format should follow the contractor's or consultant's QA/QC system.
Common Mistakes Site Engineers Should Watch For
Temperature testing can become inconsistent if field teams:
Use different measurement methods without recording them
Take readings from inconsistent locations
Remove the probe too quickly
Use the wrong probe
Exceed the probe temperature range
Forget to identify the asphalt load
Record a temperature without location or time
Confuse surface and penetration readings
Rely only on visual observation
A standardized procedure can help reduce these issues.
Safety During Asphalt Temperature Testing
Site engineers should ensure that measurements are taken safely.
Asphalt paving sites may contain:
Hot material
Moving trucks
Pavers
Rollers
Live traffic
Restricted work zones
Personnel should never enter an unsafe position simply to obtain a temperature measurement.
Follow the project's site safety requirements at all times.
FAQ: What Type of Thermometer Can a Site Engineer Use for Asphalt?
For penetration temperature measurement, a Type-K thermocouple thermometer with a suitable high-temperature needle probe can be considered.
The Myzox AST-10 with SE-IN 200 mm probe is designed for pavement temperature control and suitable for asphalt measurement.
FAQ: How Many Asphalt Temperature Readings Should Be Taken?
There is no universal number suitable for every project.
Inspection frequency should follow the applicable project specification, QA/QC plan and approved method statement.
FAQ: Should Site Engineers Use Surface or Internal Temperature?
It depends on the project requirement.
If surface temperature is required, use an appropriate surface measurement method.
If penetration temperature is required, the AST-10 with SE-IN needle probe is suitable.
FAQ: Can AST-10 Be Used by QA/QC Engineers?
Yes.
The instrument can provide numerical asphalt temperature readings that can be incorporated into QA/QC inspection records.
A Practical Field Tool for Road Site Engineers
Good site engineering depends on reliable measurements and clear documentation.
Asphalt temperature testing provides site engineers with useful information during delivery, paving and compaction.
The Myzox AST-10 Digital Asphalt Thermometer with SE-IN 200 mm needle probe provides a portable solution for penetration temperature measurement on Malaysian road construction projects.
Its Type-K compatibility, Data Hold, MAX/MIN and relative measurement functions make it a practical addition to the field engineer's measurement equipment.
Myzox Authorized Distributor in Malaysia
MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia, supplying Myzox surveying, civil engineering and road construction instruments.
Contact MTM Precision for product information, quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact us for Myzox AST-10 Digital Asphalt Thermometer Malaysia, asphalt temperature testing equipment, road construction QA/QC instruments and civil engineering equipment.
16 Aug 2026