Myzox AST-10 for Car Park and Industrial Road Asphalt Works Malaysia
Myzox AST-10 for Car Park and Industrial Road Asphalt Works Malaysia
Asphalt paving is not limited to highways and public roads. Hot mix asphalt is also widely used for car parks, factory compounds, warehouse yards, industrial roads and private access roads.
During these works, contractors may need to monitor asphalt temperature during delivery, placement and compaction as part of their construction quality-control process.
The Myzox AST-10 Digital Asphalt Thermometer, used with the SE-IN 200 mm needle probe, provides a practical solution for penetration temperature measurement during car park and industrial pavement works in Malaysia.
Where Is Asphalt Used Outside Public Roads?
Asphalt pavement is commonly found in commercial and industrial properties.
Typical applications include:
Shopping centre car parks
Factory compounds
Warehouse yards
Logistics centres
Industrial estates
Loading areas
Private access roads
Office car parks
Residential developments
Hotel car parks
Commercial properties
Distribution centres
These areas may require new asphalt paving, resurfacing or periodic pavement repair.
Why Measure Asphalt Temperature?
Hot mix asphalt begins cooling after production.
Its temperature continues changing during:
Transportation → Delivery → Placement → Paving → Compaction
Actual temperature measurements provide contractors with useful information about the material condition at a particular stage of the work.
The required paving and compaction temperatures should always follow the applicable asphalt mix requirements and project specification.
Myzox AST-10 for Asphalt Paving
The Myzox AST-10 is designed for pavement temperature control and supports Type-K thermocouple probes.
The main instrument supports a Type-K measurement range of:
-200°C to +1,370°C
Actual measurement capability depends on the connected probe.
For asphalt applications, the Myzox SE-IN Needle Probe is particularly relevant.
200 mm Needle Probe for Asphalt
The SE-IN provides:
Probe length: 200 mm
Measurement range: -50°C to +650°C
Probe type: Penetration needle probe
Myzox identifies the SE-IN as suitable for asphalt measurement.
The penetration design allows temperature to be checked within the asphalt material instead of relying only on the exposed pavement surface.
Car Park Asphalt Paving
Car parks can range from small commercial lots to large multi-zone outdoor parking areas.
Asphalt works may include:
New pavement construction
Resurfacing
Asphalt overlay
Pothole repair
Local patching
Entrance and exit lane repair
During these operations, contractors can use the AST-10 to perform temperature measurements according to the project's QA/QC procedure.
Factory Compound Asphalt Works
Factories often have internal roads and paved areas carrying cars, forklifts, vans and heavy vehicles.
Over time, these surfaces may require rehabilitation.
Typical applications include:
Factory entrance roads
Internal roads
Parking areas
Loading zones
Delivery areas
Heavy vehicle routes
A portable asphalt thermometer can be useful during both new paving and maintenance operations.
Warehouse and Logistics Centre Applications
Logistics facilities can have large paved areas exposed to frequent truck movement.
Asphalt maintenance may therefore be required around:
Loading bays
Truck routes
Trailer parking
Distribution yards
Entrance roads
Security checkpoints
The AST-10 can be carried between different work locations and used wherever asphalt penetration temperature measurement is required.
When Should Asphalt Temperature Be Checked?
Depending on the project requirements, temperature may be checked:
At Delivery
Measure hot mix asphalt after it reaches the work site.
During Placement
Check asphalt at selected locations as paving progresses.
Before Compaction
Obtain temperature information before rolling.
During Compaction
Take additional measurements where required as the asphalt continues to cool.
The measurement frequency should follow the project's approved construction and QA/QC procedures.
Why Is Penetration Measurement Useful?
Surface and internal asphalt temperatures can differ.
The exposed surface is directly affected by:
Ambient air
Wind
Rain
Moisture
Time after placement
A penetration probe measures temperature within the asphalt material.
The SE-IN 200 mm needle probe provides this direct contact measurement capability.
Can AST-10 Measure Surface Temperature?
Yes, when used with an appropriate probe.
The optional Myzox SE-SU Surface Probe has a specified range of:
-20°C to +400°C
This provides contact surface temperature measurement when required.
Therefore, the AST-10 platform can support different temperature measurement methods by changing the Type-K probe.
Data Hold for Site Measurements
The AST-10 includes a Data Hold function.
Once the reading stabilizes, the displayed value can be retained.
This can make it easier for contractors to record temperature measurements while working around active paving and compaction equipment.
MAX and MIN Measurement
The AST-10 also provides:
MAX measurement
MIN measurement
Relative measurement mode
These functions offer additional flexibility when performing repeated field temperature measurements.
Asphalt Temperature Records for Private Projects
Private commercial and industrial projects may also use QA/QC documentation.
A basic temperature record can include:
Project name
Date
Time
Location
Asphalt batch
Truck identification
Temperature
Measurement stage
Weather condition
Inspector
Remarks
These records provide traceable information about the asphalt paving operation.
Who Can Use Myzox AST-10?
The AST-10 is relevant to:
Civil engineering contractors
Road contractors
Asphalt paving companies
Factory maintenance teams
Property maintenance contractors
Facility management companies
Industrial contractors
Site engineers
QA/QC personnel
Construction supervisors
This expands its potential application beyond traditional highway construction.
FAQ: Can Myzox AST-10 Be Used for Car Park Paving?
Yes.
The AST-10 is designed for pavement temperature control and can be used for asphalt temperature measurement during car park paving, resurfacing and repair work.
FAQ: Can AST-10 Be Used for Factory Roads?
Yes.
The same asphalt temperature measurement principles used in public road construction can apply to factory roads, industrial access roads and paved logistics areas.
FAQ: Is AST-10 Suitable for Small Asphalt Repair Jobs?
Yes.
The AST-10 can be used for both larger paving operations and smaller hot asphalt repair jobs where temperature measurement is required.
FAQ: What Is the SE-IN Probe Range?
The Myzox SE-IN 200 mm needle probe has a specified measurement range of:
-50°C to +650°C
It is suitable for asphalt penetration measurement.
Asphalt Thermometer for Commercial and Industrial Projects Malaysia
Asphalt temperature monitoring is useful not only for major highway projects.
Car parks, factories, warehouses and industrial roads also require proper asphalt paving and maintenance.
The Myzox AST-10 Digital Asphalt Thermometer with SE-IN 200 mm needle probe provides contractors with a portable solution for temperature measurement during these works.
For Malaysian civil engineering contractors, property maintenance companies and industrial facilities, the AST-10 can be a useful addition to the pavement maintenance toolkit.
Myzox Authorized Distributor in Malaysia
MTM Precision Sdn. Bhd. is a Myzox Authorized Distributor in Malaysia, supplying Myzox equipment for surveying, civil engineering, road construction and pavement measurement applications.
Contact MTM Precision for product information, quotation and availability of the Myzox AST-10 Digital Asphalt Thermometer in Malaysia.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Contact us for Myzox AST-10 Digital Asphalt Thermometer Malaysia, car park asphalt paving equipment, industrial road maintenance tools and pavement temperature measurement instruments.
16 Aug 2026