Bearing Vibration Monitoring: How to Detect Bearing Problems Early Malaysia
Bearings are critical components in motors, pumps, fans, compressors, gearboxes and many other types of rotating machinery.
When bearing condition begins to deteriorate, changes may appear in vibration, temperature, noise and machine performance before complete failure occurs.
For maintenance engineers in Malaysia, routine bearing vibration monitoring can provide valuable information for preventive maintenance, predictive maintenance and machine condition monitoring.
The objective is simple:
Detect Change Early → Investigate → Plan Maintenance → Reduce Unexpected Failure
Why Do Bearings Produce Vibration?
A bearing supports rotating shafts while allowing controlled movement with relatively low friction.
When the bearing and machine are operating normally, some vibration is expected.
However, vibration behaviour may change because of:
Bearing wear
Lubrication problems
Contamination
Incorrect installation
Excessive loading
Misalignment
Shaft problems
Mechanical looseness
Damage to rolling elements or raceways
The bearing is also affected by problems elsewhere in the machine.
Therefore, increased vibration near a bearing does not automatically mean the bearing itself is defective.
What Are the Early Signs of Bearing Problems?
Possible warning signs include:
Increasing vibration
Abnormal noise
Increasing temperature
Rough machine operation
Lubrication changes
Reduced equipment performance
A machine may continue operating even when one or more of these symptoms begin to develop.
Condition monitoring aims to identify these changes before severe failure occurs.
Which Machines Need Bearing Vibration Monitoring?
Bearing vibration checks are useful for many types of industrial equipment, including:
Electric Motors → Pumps → Fans → Blowers → Compressors → Gearboxes → Generators → Cooling Towers → Conveyors → Production Machinery
Machines whose failure would significantly affect production should normally receive higher monitoring priority.
How Does a Vibration Meter Help?
A portable vibration meter measures vibration from suitable locations on the operating machine.
Depending on the instrument, it may measure:
Vibration velocity
Vibration acceleration
Vibration displacement
These measurements provide numerical information that can be recorded and compared.
Instead of saying:
“The bearing sounds louder than last month.”
the technician can record measurable machine condition data.
Vibration Velocity for Bearing Monitoring
Vibration velocity is commonly expressed in:
mm/s
It is widely used for overall rotating machinery vibration assessment.
Velocity is useful when monitoring the general condition of equipment such as motors, pumps and fans.
For example:
January — 1.8 mm/s
February — 1.9 mm/s
March — 2.0 mm/s
April — 2.6 mm/s
May — 3.4 mm/s
The trend indicates that the machine condition is changing.
Further inspection can then be performed.
Vibration Acceleration for Bearings
Bearing-related vibration can contain higher-frequency components.
Vibration acceleration, commonly expressed in:
m/s²
or:
g
can provide useful information in certain bearing applications.
However, overall acceleration measurement alone may not identify the exact bearing defect.
Advanced bearing diagnosis may require more detailed vibration analysis.
Why High-Frequency Vibration Matters
Damage to rolling elements or bearing raceways can produce short-duration impacts as the bearing rotates.
These impacts can contain higher-frequency vibration components.
This is one reason acceleration-based measurements and specialized bearing analysis techniques can be useful.
However, bearing vibration analysis becomes increasingly technical when the objective changes from:
“Is this machine changing?”
to:
“Which exact bearing component is damaged?”
The latter may require a vibration analyzer and experienced interpretation.
Where Should Bearing Vibration Be Measured?
Measurements should generally be taken from suitable rigid machine locations close to the bearing housing.
For an electric motor:
Drive End — DE
Non-Drive End — NDE
For a pump set:
Motor NDE → Motor DE → Pump DE → Pump NDE
For a fan:
Motor Bearings → Fan Bearings
Use the same measurement locations whenever possible.
Why Sensor Position Matters
If one technician measures on top of a bearing housing while another measures on a thin machine guard, their readings may be very different.
For condition monitoring, establish fixed measurement points.
For example:
M01-DE-H
Motor 01 → Drive End → Horizontal
M01-DE-V
Motor 01 → Drive End → Vertical
M01-NDE-H
Motor 01 → Non-Drive End → Horizontal
This improves repeatability.
Horizontal, Vertical and Axial Measurements
Machine vibration can be measured in different directions.
Horizontal
Measures vibration in the horizontal direction.
Vertical
Measures vibration vertically.
Axial
Measures vibration along the shaft axis.
Different mechanical conditions can influence different directions.
For more systematic monitoring, maintenance teams may record multiple directions at critical bearing locations.
Can High Vibration Confirm Bearing Failure?
No.
This is an important point.
High vibration around a bearing can also be caused by:
Imbalance
Misalignment
Mechanical looseness
Bent shaft
Coupling problems
Foundation problems
Problems from the driven machine
Do not replace a bearing solely because one vibration reading is high.
Investigate the complete machine.
Bearing Problem vs Imbalance
Imbalance is related to uneven rotating mass.
A dirty industrial fan, for example, may become unbalanced and create high vibration at the fan bearings.
The bearing may simply be transmitting the vibration.
Replacing the bearing would not solve the imbalance.
Bearing Problem vs Misalignment
Misalignment can place additional forces on bearings.
A motor-pump set with poor shaft alignment may show elevated vibration around both machines.
Repeated bearing replacement without correcting alignment can lead to recurring problems.
Bearing Problem vs Mechanical Looseness
A loose bearing housing or machine base can also produce high vibration.
Check:
Bearing Housing → Bolts → Base Plate → Foundation
before assuming internal bearing damage.
Lubrication and Bearing Vibration
Lubrication is important to bearing condition.
Possible lubrication problems include:
Insufficient lubricant
Excessive lubricant
Incorrect lubricant
Contamination
Lubricant deterioration
Vibration should therefore be considered together with lubrication condition and maintenance history.
Bearing Temperature and Vibration
Temperature is another useful indicator.
Consider a bearing that shows:
Increasing Vibration + Increasing Temperature
This combination may justify more urgent investigation than either observation alone.
Maintenance teams can combine:
Vibration Meter + Infrared Thermometer / Thermal Imager
to obtain additional condition information.
Bearing Noise and Vibration
Technicians often identify bearing problems by sound.
Experienced personnel may recognize unusual:
Grinding
Rattling
Rumbling
High-pitched noise
However, human hearing is subjective.
Vibration measurement provides numerical information that can be recorded and compared.
The best approach can combine:
Listen → Measure → Record → Compare
Example: Motor Bearing Trend
Suppose a motor's Drive End bearing vibration is recorded monthly:
January — 1.5 mm/s
February — 1.6 mm/s
March — 1.7 mm/s
April — 2.1 mm/s
May — 2.8 mm/s
June — 3.6 mm/s
At the same time, bearing temperature has also increased.
The maintenance team now has objective evidence that the machine condition is changing.
Further investigation can be scheduled.
Why Trending Is Better Than One-Time Testing
A one-time reading answers:
“What is the vibration today?”
Trending answers:
“How has this machine changed over the last six months?”
For predictive maintenance, the second question is often more valuable.
This is why baseline measurements should ideally begin while equipment is operating normally.
Bearing Vibration Monitoring Frequency
There is no universal inspection interval.
Frequency depends on:
Machine criticality
Operating hours
Failure history
Bearing type
Operating environment
Production importance
Maintenance strategy
Critical machines may require more frequent inspection than non-critical equipment.
When Should a Bearing Be Investigated?
Further inspection may be appropriate when:
Vibration increases significantly
Vibration changes suddenly
Temperature rises
Abnormal noise develops
Lubrication condition changes
Machine performance changes
Historical trend deteriorates
The maintenance decision should consider the overall condition rather than one isolated measurement.
Do You Need a Vibration Analyzer for Bearings?
For basic screening and trending:
Portable Vibration Meter
may be sufficient.
For detailed bearing diagnosis:
Vibration Analyzer
may be more appropriate.
Advanced analysis may involve:
Frequency spectrum
Bearing defect frequencies
Harmonics
Envelope techniques
Time waveform analysis
A practical strategy is:
Routine Vibration Meter Checks → Identify Abnormal Machine → Detailed Analysis if Required
Bearing Vibration Meter Options from MTM Precision
MTM Precision supplies vibration measurement instruments for bearing and rotating machinery maintenance applications in Malaysia.
Showa Sokki SH-1332B
Suitable for professional industrial vibration measurement and machinery maintenance applications.
Landtek VM6310 / VM6360 / VM6380
Portable vibration meter options for different machine vibration measurement requirements.
Wintact Vibration Meters
Suitable for routine bearing, motor, pump, fan and general machinery vibration checks.
Benetech Vibration Meters
Additional portable options for industrial vibration measurement and maintenance applications.
Instrument selection should consider required parameters, frequency range and intended application.
Start with Your Critical Bearings
A factory does not need to measure every bearing immediately.
Start with critical machinery:
Main Production Motor
Air Compressor
Cooling Water Pump
Exhaust Fan
Conveyor Gearbox
Cooling Tower
Establish measurement points and baseline readings.
Then monitor them consistently.
This creates the foundation of a practical bearing condition monitoring programme.
Looking for a Bearing Vibration Meter in Malaysia?
MTM Precision Sdn Bhd supplies vibration meters and industrial testing instruments for factory maintenance, engineering, HVAC, facility management and predictive maintenance applications in Malaysia.
Applications include:
Bearings → Electric Motors → Pumps → Fans → Compressors → Gearboxes → Generators → HVAC → Factory Machinery
Contact MTM Precision for assistance selecting suitable vibration measurement equipment for bearing inspection and machine condition monitoring.
MTM Precision Sdn Bhd
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
20 Aug 2026