Noyafa NF-981 OTDR Fiber Tester Malaysia

Noyafa NF-981 OTDR Fiber Tester Malaysia

 

Fiber optic networks are increasingly used in FTTH installations, CCTV systems, office networks, telecommunications, industrial facilities and data centres across Malaysia.

 

When a fiber link develops a problem, technicians need more than a simple optical power reading. They need to know where the problem is, how far away it is and what type of event may be causing the loss.

 

The Noyafa NF-981 OTDR Fiber Tester combines several useful fiber testing functions in one portable instrument, making it suitable for installation, maintenance and troubleshooting work.

 

What Is the Noyafa NF-981?

 

The Noyafa NF-981 is a multifunction fiber optic testing instrument built around an OTDR (Optical Time Domain Reflectometer).

 

Instead of carrying several separate instruments, technicians can use the NF-981 for multiple common fiber testing tasks.

 

Key functions include:

 

OTDR fiber testing

 

Optical Power Meter (OPM)

 

Visual Fault Locator (VFL)

 

Optical laser source

 

Intelligent event analysis / event map

 

RJ45 wire mapping

 

SOR test file storage

 

This makes the NF-981 particularly useful for technicians who work with both fiber optic infrastructure and conventional network cabling.

 

OTDR Testing at 1310nm and 1550nm

 

The NF-981 supports two commonly used single-mode fiber test wavelengths:

 

1310nm and 1550nm

 

Testing at these wavelengths helps technicians evaluate fiber links and identify events such as:

 

Fiber breaks

 

Connector losses

 

Splice losses

 

Excessive attenuation

 

Reflective events

 

Abnormal points along a fiber link

 

The NF-981 supports testing distances of up to approximately 60 km, making it useful for many building, campus, FTTH and telecommunications applications.

 

Its specified dynamic range is up to 24/22 dB, depending on the wavelength.

 

Locate Fiber Problems by Distance

 

One of the biggest advantages of an OTDR compared with a basic optical power meter is its ability to provide distance information.

 

For example, if a fiber link suddenly stops working, an optical power meter may confirm that the received optical level is too low.

 

But it does not necessarily tell the technician where the problem is.

 

An OTDR can help indicate that an abnormal event is located at a particular distance from the test point.

 

The technician can then investigate that section of the fiber route instead of checking the entire cable manually.

 

This can significantly improve troubleshooting efficiency for long or inaccessible fiber links.

 

Intelligent Event Map

 

Traditional OTDR traces can be difficult for inexperienced users to interpret.

 

The NF-981 includes intelligent event analysis designed to present detected events in a more understandable format.

 

This can help users identify significant points along the fiber link without relying entirely on manual interpretation of the OTDR waveform.

 

For experienced technicians, the OTDR trace still provides valuable diagnostic information.

 

For newer users, the event map can make initial troubleshooting easier.

 

Built-In Optical Power Meter

 

The NF-981 also includes an Optical Power Meter.

 

According to Noyafa's specifications, the OPM measurement range extends approximately from:

 

-50 dBm to +26 dBm

 

An OPM is useful for checking received optical power and evaluating whether a fiber link is operating within an acceptable optical power budget.

 

This function is commonly required during:

 

Fiber installation

 

FTTH commissioning

 

Equipment maintenance

 

Network troubleshooting

 

Optical transmission verification

 

Having the OPM integrated into the same instrument reduces the number of separate testers technicians need to carry.

 

Visual Fault Locator

 

The built-in Visual Fault Locator provides another useful troubleshooting method.

 

A VFL sends visible red laser light through the fiber.

 

If there is a severe bend, break or damaged connection, visible red light may appear around the affected location when the fault is physically accessible.

 

VFL testing is particularly useful for short-distance troubleshooting, connector checking and fiber identification.

 

OTDR and VFL therefore complement each other:

 

OTDR → determines the approximate fault distance

 

VFL → helps visually identify accessible faults

 

Built-In Optical Laser Source

 

The NF-981 also provides an optical laser source.

 

When used together with an optical power meter, a light source can help technicians perform basic optical loss testing.

 

This adds another practical function for technicians who regularly install or maintain fiber networks.

 

RJ45 Wire Mapping

 

An interesting advantage of the NF-981 is that it is not limited entirely to fiber.

 

It also provides RJ45 wire mapping.

 

This can be useful for technicians working on projects where both fiber backbone and copper Ethernet cabling are present.

 

Instead of carrying completely separate diagnostic equipment for every basic test, technicians can perform several common checks using one multifunction instrument.

 

Where Can the NF-981 Be Used?

 

The NF-981 is suitable for a wide range of applications in Malaysia, including:

 

FTTH Installation

 

Check fiber length, optical loss and possible faults during installation and maintenance.

 

CCTV Fiber Networks

 

Troubleshoot fiber connections between CCTV equipment, switches and control rooms.

 

Data Centres

 

Assist with fiber link verification and troubleshooting between racks, network equipment and distribution points.

 

Office and Commercial Buildings

 

Test fiber backbone connections between floors, server rooms and communication rooms.

 

Industrial Facilities

 

Locate problems in fiber links connecting production areas, control systems and network infrastructure.

 

Telecommunications

 

Perform field troubleshooting and maintenance on longer single-mode fiber links.

 

NF-981 vs Basic Fiber Tester

 

A basic fiber tester may include only an optical power meter and VFL.

 

Those tools are useful, but they provide limited information when a long fiber link develops a fault.

 

The NF-981 adds OTDR capability.

 

This means technicians can investigate not only whether a fiber link has a problem, but also approximately where that problem occurs.

 

For professional troubleshooting, this is a major advantage.

 

Who Should Consider the Noyafa NF-981?

 

The NF-981 is particularly suitable for:

 

Fiber optic installers

 

Network contractors

 

CCTV installers

 

FTTH technicians

 

Telecom technicians

 

Building maintenance teams

 

Data centre technicians

 

IT infrastructure contractors

 

Industrial maintenance teams

 

For users who only need occasional optical power measurements, a basic OPM may be sufficient.

 

For technicians who regularly need to locate fiber faults and analyse fiber links, an OTDR such as the NF-981 is considerably more useful.

 

Noyafa NF-981 in Malaysia

 

Choosing an OTDR should not be based only on maximum distance.

 

Technicians should also consider the type of fiber network, required wavelength, expected link length, dynamic range and the level of diagnostic information required.

 

The Noyafa NF-981 provides a practical combination of OTDR, OPM, VFL, laser source and network cable testing functions for technicians who want one portable instrument for everyday fiber installation and troubleshooting.

 

For Malaysian contractors moving from basic fiber testers to OTDR-based diagnostics, the NF-981 can be a practical step up.

 

Contact MTM Precision

 

For Noyafa NF-981 OTDR Fiber Tester in Malaysia, product enquiries, technical information and fiber optic testing equipment, contact MTM Precision.

 

MTM Precision Sdn Bhd

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

WhatsApp: +6016-660 7346

Email: mtmpre@yahoo.com


 

24 Aug 2026