FUZRR FR205D AC/DC Digital Clamp Multimeter Malaysia
FUZRR FR205D AC/DC Digital Clamp Multimeter Malaysia
The FUZRR FR205D is a versatile True RMS digital clamp multimeter designed for electricians, automotive technicians, solar installers, HVAC contractors and factory maintenance teams in Malaysia.
Unlike basic clamp meters that measure only AC current, the FR205D can measure both AC and DC current up to 600A. This makes it suitable for troubleshooting conventional electrical circuits as well as batteries, DC power supplies, automotive charging systems and solar installations.
Why Choose the FUZRR FR205D?
The biggest advantage of the FUZRR FR205D is its ability to measure current without disconnecting the conductor.
Simply clamp the jaw around one conductor to check the current flowing through the circuit. This provides a faster and more convenient way to perform electrical inspections and troubleshooting.
Key advantages include:
AC and DC current measurement up to 600A
AC and DC voltage measurement up to 600V
6000-count digital display
True RMS measurement
Automatic range selection
Resistance and capacitance measurement
Frequency and duty-cycle measurement
Temperature measurement
NCV non-contact voltage detection
Live-wire identification
Maximum and minimum value recording
Data-hold function
Continuity and diode testing
Automatic shutdown
Backlit LCD display
AC and DC Current Measurement
Many entry-level clamp meters are limited to AC current. That may be sufficient for checking standard building wiring, motors and distribution boards, but it cannot cover applications involving batteries or other DC electrical systems.
The FUZRR FR205D measures both AC and DC current from 0.00A to 600.0A.
This makes it suitable for:
Electrical distribution boards
Motors, pumps and fans
Automotive charging systems
Car and truck electrical troubleshooting
Battery-powered equipment
Solar PV installations
DC power supplies
Industrial control systems
HVAC equipment
Machinery preventive maintenance
For DC current measurement, the meter’s zeroing function should be used before clamping around the conductor. Only one conductor should be placed inside the jaw during measurement.
True RMS Measurement
Electrical loads such as variable-frequency drives, switching power supplies, LED drivers and electronic controllers may produce distorted waveforms.
A conventional averaging meter may provide misleading readings under these conditions. The True RMS function of the FR205D helps provide more dependable AC voltage and current measurements when working with non-linear electrical loads.
This is especially useful for technicians working on:
Inverter air-conditioning systems
Variable-speed motors
Industrial control panels
Electronic power supplies
Modern appliances
Solar inverters
LED lighting circuits
Main Technical Specifications
Measurement or FeatureFUZRR FR205D SpecificationMaximum display6000 countsRange selectionAutomaticDC voltageUp to 600VAC voltageUp to 600VDC currentUp to 600AAC currentUp to 600AResistanceUp to 60MΩCapacitanceUp to 100mFFrequencyUp to 10MHzDuty cycle0.1%–99.9%Temperature-20°C to 1000°CFrequency response40Hz–500HzJaw dimensions28 × 42mmMeasurement systemTrue RMSDisplayBacklit LCDPower supply2 × AAA batteriesSafety ratingCAT III 600V / CAT IV 600V
Automotive and Battery Applications
Because the FR205D can measure DC current, it is useful for automotive electrical troubleshooting.
Technicians can use it to investigate:
Alternator charging current
Battery charging and discharging
Abnormal current consumption
Electrical accessory loads
DC motors
Vehicle lighting systems
Battery-powered machinery
For parasitic-current testing, users must first confirm that the expected current falls within the meter’s operating range and follow the correct testing procedure. The clamp must be placed around only one battery cable—not around both the positive and negative cables together.
Solar PV Applications
The FUZRR FR205D can also assist with basic solar PV electrical checks.
Possible applications include:
Checking DC current from a solar string
Comparing current between solar strings
Measuring battery charging current
Checking inverter input and output
Identifying unusual current differences
Performing routine system inspections
However, technicians must verify the installation voltage and measurement category before testing. The FR205D has a maximum voltage measurement range of 600V and should not be used on systems that exceed its specified limits.
Factory and HVAC Maintenance
Factory maintenance teams can use the FR205D as a multipurpose troubleshooting instrument.
It can assist with:
Checking motor operating current
Comparing current across circuits
Investigating overloaded equipment
Testing supply voltage
Checking capacitors
Measuring temperature
Testing continuity
Checking resistance
Detecting live conductors
Recording maximum and minimum readings
HVAC technicians can use the meter to check compressor current, fan-motor current, capacitors, supply voltage and temperature during air-conditioning maintenance.
NCV Voltage Detection
The built-in NCV function allows users to detect the presence of an electric field without directly touching a bare conductor.
NCV is helpful for preliminary checks involving:
Power outlets
Extension cables
Distribution boards
Electrical wiring
Appliances and machinery
NCV detection should be treated as an initial indication only. Before touching or repairing a circuit, users should perform a proper contact measurement and follow the required electrical isolation and lockout procedures.
FUZRR FR205B vs FR205D
The FR205D is the more capable model in the FR205 series.
FeatureFR205BFR205DMaximum display4000 counts6000 countsMaximum AC current400A600ADC current measurementNoYes, up to 600AMaximum voltage400V600VMaximum resistance40MΩ60MΩMaximum capacitance40mF100mFTrue RMSYesYes
Choose the FR205B for basic AC electrical work. Choose the FR205D when DC current measurement, a wider range and higher display resolution are required.
Who Should Use the FUZRR FR205D?
The FUZRR FR205D is suitable for:
Electricians
Automotive technicians
Solar PV installers
HVAC contractors
Factory maintenance teams
Machinery service technicians
Electrical engineering students
Building maintenance personnel
Facility-management teams
Its combination of AC/DC current measurement and general multimeter functions makes it a practical instrument for both field service and routine maintenance.
Buy FUZRR FR205D in Malaysia
Looking for the FUZRR FR205D AC/DC Digital Clamp Multimeter in Malaysia?
Contact MTM Precision for product availability, quotation and technical assistance. You may also send us details of your application so that we can confirm whether the FR205D is suitable for your required current, voltage and testing environment.
MTM Precision Sdn. Bhd. (744811-A)
Telephone: +603-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com / enquiry@mtmpre.com.my
Website: www.mtmpre.com.my
Showroom & Service Centre:
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
19 Sep 2026
