DITRON 602 Series IP54 Digital Calipers with Data Hold | 150mm, 200mm & 300mm Malaysia
DITRON 602 Series IP54 Digital Calipers with Data Hold
The DITRON 602 series combines catalogue-stated IP54 protection, a HOLD function and a zinc alloy display housing for routine dimensional measurement.
Available in 150mm, 200mm and 300mm measuring ranges, these calipers support outside, inside, step and depth measurement. The HOLD function retains the displayed reading so subsequent slider movement does not change the held value.
For workshops and inspection departments in Malaysia, select according to measuring capacity, required accuracy and operating conditions.
PRODUCT HIGHLIGHTS
• IP54 protection, as stated in the manufacturer’s catalogue.
• HOLD function for retaining a displayed reading.
• Zinc alloy display housing.
• 4Cr13 stainless steel ruler.
• Optical glass fixed grid.
• Resolution: 0.01mm / 0.0005in.
• Outside, inside, step and depth measurement.
• Automatic power-on.
• Automatic power-off after five minutes of inactivity.
MODELS AND SPECIFICATIONS
DITRON 602-150
Measuring range: 0–150mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.02mm
Drawing dimension a: 40mm
Drawing dimension b: 21mm
Drawing dimension c: 16.5mm
Drawing dimension d: 234mm
DITRON 602-200
Measuring range: 0–200mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.03mm
Drawing dimension a: 49.5mm
Drawing dimension b: 24mm
Drawing dimension c: 19mm
Drawing dimension d: 287mm
DITRON 602-300
Measuring range: 0–300mm
Resolution: 0.01mm / 0.0005in
Catalogue-stated accuracy: ±0.04mm
Drawing dimension a: 59.2mm
Drawing dimension b: 30mm
Drawing dimension c: 22mm
Drawing dimension d: 389mm
All drawing dimensions are in millimetres.
HOW THE HOLD FUNCTION HELPS
The catalogue states that HOLD locks the measurement value to prevent slider movement from changing the displayed reading.
This can be useful when the display is difficult to view at the measuring location. Take the measurement, activate HOLD according to the operating instructions, then reposition the instrument to read or record the value.
HOLD retains a reading. It does not physically lock the jaws, improve accuracy or establish storage of multiple measurements.
Before taking the next measurement, confirm that HOLD has been released.
IP54 PROTECTION
The manufacturer describes the 602 series as offering protection against splashes and dust ingress.
IP54 should not be treated as an immersion rating. Follow the manufacturer’s permitted exposure, cleaning and maintenance instructions.
For applications involving coolant, oil or cleaning chemicals, confirm compatibility separately. Keep the measuring faces clean because chips or residue between the jaws and workpiece can affect results.
ZINC HOUSING AND STAINLESS STEEL RULER
The catalogue specifies a zinc alloy display housing and a 4Cr13 stainless steel ruler.
Housing construction, environmental protection and measuring accuracy are separate specifications. Select the instrument using all three rather than assuming a metal housing provides higher accuracy.
CHOOSING THE MEASURING RANGE
For smaller components and general dimensional checks within a 150mm capacity.
For components requiring more opening capacity than a 150mm model.
For larger components requiring up to 300mm capacity. Check jaw reach and available clearance before selecting.
A longer measuring range does not mean higher accuracy. Use the specification for the exact model.
FOUR MEASUREMENT FUNCTIONS
Outside Measurement
Use the external jaws to check accessible dimensions such as width, thickness and outside diameter.
Inside Measurement
Use the internal jaws to check accessible internal dimensions. Align the jaws carefully with the feature.
Step Measurement
Use the step measuring faces to check suitable stepped features.
Depth Measurement
Use the depth rod to measure accessible holes or recesses. Keep the reference face seated correctly against the workpiece.
DITRON 602 VS 602A
The supplied 602 catalogue page highlights data HOLD.
The separately supplied 602A page highlights absolute measurement.
These functions serve different purposes. HOLD retains a displayed reading, while absolute measurement concerns the measuring reference system.
Do not assume that the 602 includes the 602A’s absolute function, or that the 602A includes HOLD, without confirming the supplied configuration.
APPLICATIONS IN MALAYSIA
The DITRON 602 series can be considered for:
• General workshop measurements.
• Machining and fabrication checks.
• Incoming component inspection.
• Maintenance and spare-part assessment.
• Production and assembly checks.
• Measurements where a reading needs to be retained before recording.
For workshops and factories in Selangor, Kuala Lumpur, Johor and Penang, assess the workpiece tolerance and measuring environment before selecting.
For close-tolerance inspection, a micrometer or another measuring instrument may be more appropriate.
RESOLUTION AND ACCURACY
The metric resolution is 0.01mm. This describes the displayed increment, rather than a guarantee of ±0.01mm accuracy.
Catalogue-stated accuracy:
602-150: ±0.02mm
602-200: ±0.03mm
602-300: ±0.04mm
Cleanliness, jaw alignment, measuring force, temperature and instrument condition also affect results. The HOLD function preserves the reading obtained; it does not correct measurement errors.
BASIC MEASURING PROCEDURE
1. Clean the measuring faces and workpiece.
2. Confirm HOLD is released.
3. Close the jaws gently and check zero.
4. Position the appropriate measuring faces.
5. Apply light, consistent contact force.
6. Check alignment and reading stability.
7. Activate HOLD if required, following the instructions.
8. Read or record the retained value.
9. Release HOLD before the next measurement.
10. Recheck zero as appropriate.
CARE AND BASIC CHECKS
• Remove chips before closing the jaws.
• Keep the sliding surfaces clean.
• Avoid impact and excessive measuring force.
• Do not use the jaws as levers or clamps.
• Avoid measuring hot or moving components.
• Keep the battery compartment correctly closed.
• Follow the supplied cleaning and storage instructions.
• Check performance against suitable reference standards according to your quality procedure.
The supplied page does not explicitly specify battery type, rechargeable operation, Bluetooth connectivity or backlight capability.
FREQUENTLY ASKED QUESTIONS
What is the main feature of the DITRON 602?
It combines catalogue-stated IP54 protection with a HOLD function for retaining the displayed measurement.
Does HOLD lock the jaws?
No. The catalogue describes locking the measurement value, rather than mechanically locking the slider.
Does HOLD save multiple readings?
Multiple-reading storage is not specified on the supplied page.
Is HOLD the same as absolute measurement?
No. HOLD retains a displayed reading. Absolute measurement concerns reference handling.
What measuring ranges are available?
The catalogue lists 150mm, 200mm and 300mm models.
What is the resolution?
The listed resolution is 0.01mm / 0.0005in.
Is the 602 rechargeable?
Rechargeable operation and Type-C charging are not listed on this page.
Can it be immersed in water?
Do not treat IP54 as an immersion rating. Follow the manufacturer’s operating instructions.
Can it measure depth?
Yes. Outside, inside, step and depth measurement are listed.
Is a calibration certificate included?
The DIN 862 marking shown in the catalogue does not establish that an individual calibration certificate is included. Specify documentation requirements when requesting a quotation.
SEO META DESCRIPTION
Explore DITRON 602 IP54 digital calipers with data HOLD in Malaysia. Compare 150mm, 200mm and 300mm models with zinc housings and 0.01mm resolution.
ENQUIRE ABOUT DITRON 602 DIGITAL CALIPERS
Contact MTM Precision with your required measuring range, quantity and application. Please specify any data HOLD, environmental protection or calibration documentation requirements.
Availability, battery details, final configuration and supplied accessories are subject to confirmation.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
25 Oct 2026
