DITRON 161 Series Vernier Height Gauge | 200mm to 1000mm Selection Guide Malaysia
Choosing a Vernier Height Gauge for Height Measurement and Scribing
The DITRON 161 Series Vernier Height Gauge is designed for measuring heights and scribing reference lines on workpieces. With six measuring ranges from 0–200mm to 0–1000mm, the series offers options for small machined components, workshop layout work and taller parts.
For engineering workshops and quality control teams in Malaysia, the main selection factors are workpiece height, required accuracy, available working space and access to the measurement surface.
The catalogue specifies a 0.02mm resolution across all six models. Accuracy varies by model, so selecting a larger range does not automatically provide the same accuracy as a smaller instrument.
KEY FEATURES
Mechanical Vernier Reading
The vernier scale provides a mechanical reading without requiring a battery. Operators should read the main scale and vernier carefully, with their eyes aligned to the graduations to reduce reading errors.
Fine Adjustment Device
The fine adjustment mechanism helps the operator approach the required height gradually. This is useful when setting a scribing position or bringing the contact gently onto a workpiece surface.
Carbide-Tipped Scriber
The catalogue specifies a carbide-tipped scriber for fine scribing on workpieces. This supports workshop marking operations where a reference line must be transferred from a surface plate datum.
Height Measurement and Scribing
The same instrument can support dimensional checking and layout work. The contact arrangement, reference setting and workpiece position must suit the task.
DITRON 161 SERIES MODEL SPECIFICATIONS
All dimensions and accuracy values below are in millimetres.
Model: 161-200
Measuring range: 0–200mm
Resolution: 0.02mm
Accuracy: ±0.03mm
Model: 161-300
Measuring range: 0–300mm
Resolution: 0.02mm
Accuracy: ±0.04mm
Model: 161-500
Measuring range: 0–500mm
Resolution: 0.02mm
Accuracy: ±0.05mm
Model: 161-600
Measuring range: 0–600mm
Resolution: 0.02mm
Accuracy: ±0.06mm
Model: 161-800
Measuring range: 0–800mm
Resolution: 0.02mm
Accuracy: ±0.07mm
Model: 161-1000
Measuring range: 0–1000mm
Resolution: 0.02mm
Accuracy: ±0.07mm
These specifications are taken from the supplied DITRON catalogue page.
UNDERSTANDING RESOLUTION AND ACCURACY
The 0.02mm resolution describes the scale reading increment. It does not mean every model has an accuracy of ±0.02mm.
For example, the 161-300 has a 0.02mm resolution and a stated accuracy of ±0.04mm. The 161-1000 has the same resolution but a stated accuracy of ±0.07mm.
When checking a drawing tolerance, consider the instrument accuracy together with the measurement setup, surface plate condition, contact method and operator technique. A readable scale alone does not establish whether the complete measurement process is suitable for a tight tolerance.
WHICH MEASURING RANGE SHOULD YOU CHOOSE?
200mm and 300mm Models
The 161-200 and 161-300 are options for smaller components and bench inspection tasks. Choose between them based on the highest feature that must be reached and the space needed to position the scriber.
500mm and 600mm Models
The 161-500 and 161-600 provide additional vertical capacity for taller parts and workshop layout tasks. Check that the surface plate offers enough room for both the gauge base and the workpiece.
800mm and 1000mm Models
The 161-800 and 161-1000 suit applications requiring greater vertical reach. Taller setups need particular attention to stability, handling and clear access around the instrument.
Select a range that covers the actual task while remaining practical to operate. Also check whether the scriber can reach the intended feature without colliding with shoulders, fixtures or surrounding surfaces.
TYPICAL WORKSHOP APPLICATIONS
Machined Component Height Checks
With a suitable surface plate and contact setup, the gauge can be used to check accessible feature heights relative to a reference surface.
Scribing Reference Lines
The carbide-tipped scriber can mark a line at a selected height. This is useful for component layout before subsequent workshop operations.
Fixture and Tooling Setup
The fine adjustment device helps position the scriber or contact at a required reference height during fixture preparation and setup checks.
Engineering Training
The mechanical scale provides a practical way to teach vernier reading, datum selection and controlled measuring technique.
These applications are relevant to machining, fabrication and maintenance workshops in areas such as Selangor, Penang and Johor.
BASIC MEASUREMENT WORKFLOW
1. Prepare the reference surface.
Clean the surface plate, gauge base and workpiece. Remove loose dirt and check for burrs that could prevent stable seating.
2. Check the contact arrangement.
Make sure the scriber and its holder are secure. Inspect the contact tip for visible damage.
3. Establish the reference.
Check the reading against the intended datum before measuring. If the contact arrangement changes, recheck the reference.
4. Position the workpiece.
Seat the part securely on its reference face. Avoid measuring a component that rocks or moves under light contact.
5. Approach with fine adjustment.
Bring the contact gently to the target surface. Excessive force can deflect the setup or disturb the workpiece.
6. Read and repeat.
Read the scale with good lighting and correct eye alignment. Repeat the measurement to assess consistency before recording the result.
For scribing, set and secure the required height, then move the gauge steadily while keeping the base seated on the reference surface.
ACCESSORIES AND CONFIGURATION
The catalogue illustrates different scribers, clamping components and extension pieces for different gauge sizes.
Before ordering, confirm the accessory configuration for the selected model, including the supplied scriber, holder and any extension required for the application. Do not assume that every component shown in the illustration is included with every gauge.
CARE AND ROUTINE CHECKING
Keep the base and reference surface clean. Protect the scale and scriber from impact, and avoid using the instrument to push or reposition heavy workpieces.
If readings become inconsistent, first check cleanliness, loose holders, workpiece stability and measuring technique. Persistent disagreement with a suitable reference warrants further inspection or calibration.
Calibration assesses measurement performance. Repair addresses a fault or damaged mechanism. Any required calibration documentation should be specified and confirmed when requesting a quotation.
FREQUENTLY ASKED QUESTIONS
What is the resolution of the DITRON 161 Series?
The supplied catalogue lists a resolution of 0.02mm for all six models.
What measuring ranges are available?
The listed ranges are 0–200mm, 0–300mm, 0–500mm, 0–600mm, 0–800mm and 0–1000mm.
Does this height gauge need a battery?
It uses a mechanical vernier scale, so a battery is not required for reading.
Can it be used for marking lines?
Yes. The catalogue identifies scribing as an intended function and specifies a carbide-tipped scriber.
Does it have fine adjustment?
Yes. A fine adjustment device is listed in the catalogue.
Are all illustrated accessories included?
The supplied page does not establish the complete package contents for each model. Confirm the included accessories before ordering.
What information should I provide for model selection?
Provide the maximum feature height, drawing tolerance, workpiece shape, surface plate size and whether the main task is measurement or scribing.
SEO META DESCRIPTION
Explore DITRON 161 Series vernier height gauges in Malaysia. Compare 200–1000mm ranges, 0.02mm resolution, fine adjustment and carbide-tipped scribers.
CONTACT MTM PRECISION
Contact MTM Precision with your required range, workpiece details and measurement tolerance for assistance selecting a DITRON 161 Series Vernier Height Gauge and confirming its accessory configuration.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
25 Oct 2026
