Linshang LS173 Colorimeter for Paint and Coating Color Measurement Malaysia
Linshang LS173 Colorimeter for Paint and Coating Color Measurement Malaysia
Color consistency is an important quality requirement for painted and coated products. Even when the same paint code or coating specification is used, differences in formulation, application conditions, substrate and production processes can result in visible color variation.
The Linshang LS173 D/8 Touch Screen Colorimeter provides manufacturers, paint suppliers and quality control teams with an objective method for measuring color and evaluating color differences between an approved standard and a production sample.
For companies in Malaysia that still depend mainly on visual comparison, the LS173 can help make paint and coating color inspection more consistent and measurable.
Why Can Paint and Coating Colors Vary?
A painted product may look correct during production but appear different when compared with an approved sample.
Possible causes of color variation include:
Different paint batches
Pigment variation
Formulation differences
Mixing ratio
Application conditions
Curing conditions
Substrate differences
Production process changes
Supplier variation
Surface characteristics
When appearance is part of the customer's acceptance criteria, these differences can become a quality issue.
Visual Inspection vs Instrumental Color Measurement
Visual inspection remains useful, especially when evaluating the overall appearance of a finished product.
However, human color judgement can be affected by:
Lighting conditions
Viewing angle
Surrounding colors
Inspector experience
Eye fatigue
Individual color perception
This can create situations where one inspector accepts a sample while another believes the color is different.
The LS173 adds numerical measurement data to the inspection process.
Instead of simply reporting that a coating is “slightly darker” or “more yellow,” QC personnel can compare measurable color information.
Using an Approved Paint or Coating Sample
A practical color control system normally starts with an approved standard.
This may be:
Customer-approved sample
Master panel
Standard color sample
Approved production component
Reference coating sample
The reference can then be compared with subsequent production samples.
A basic workflow can be:
Approved Standard → Measure Production Sample → Compare Color → Evaluate Difference → Accept or Investigate
This makes the inspection procedure more repeatable across different batches and operators.
Delta E Measurement for Paint and Coating QC
Delta E (ΔE) is commonly used to express the measured difference between two colors.
In general:
Smaller ΔE = smaller measured color difference
Larger ΔE = greater measured color difference
A manufacturer can therefore compare a coated production sample against the approved standard and evaluate whether the difference falls within its established acceptance criteria.
The acceptable Delta E tolerance should be defined according to the actual product, customer specification and quality requirements.
There is no single ΔE limit that should automatically be applied to every paint or coating application.
Incoming Paint and Coating Inspection
Color quality control can begin when materials arrive from the supplier.
If a company receives painted parts, coated components or suitable color samples from external suppliers, incoming QC personnel can compare them with approved references.
This can help detect variation before the materials enter production or assembly.
For companies working with several suppliers, instrumental color measurement can also provide a more consistent basis for supplier evaluation.
Production Color Monitoring
Color measurement can be incorporated into the production process instead of being performed only after the entire batch has been completed.
For example:
Production Start → First Sample Check → Mid-Production Check → Final Sample Check
If measurement results begin to show increasing variation, the production team can investigate the process earlier.
Early detection can help reduce the risk of producing a large batch of products with unacceptable color differences.
Finished Product Inspection
Before shipment, finished painted or coated products can be compared with the approved reference.
This can be useful for products where appearance directly affects customer acceptance.
Examples may include:
Painted metal components
Coated panels
Appliance parts
Consumer products
Automotive components
Industrial equipment housings
Furniture components
Decorative products
Manufactured enclosures
Objective measurement can support the final QC decision and improve consistency between different inspectors.
D/8 Color Measurement Geometry
The Linshang LS173 uses D/8 optical geometry, referring to diffuse illumination with an 8-degree viewing geometry.
Controlled optical geometry is important in instrumental color measurement because it provides a standardized method for evaluating samples.
This is particularly valuable when a company wants measurements to be repeatable between operators, production batches and inspection stages.
Color Measurement and Coating Thickness Are Different
It is important to distinguish between a colorimeter and a coating thickness gauge.
A colorimeter such as the LS173 is used to evaluate:
Color
Color difference
Delta E
Color consistency
A coating thickness gauge is used to determine the thickness of a coating layer.
For some paint and coating QC applications, both measurements may be important.
A component can have the correct coating thickness but still have the wrong color.
Likewise, the color may be acceptable while the coating thickness is outside specification.
Therefore, these instruments perform different but complementary quality control functions.
Colorimeter and Gloss Meter Are Also Different
Color and gloss are separate appearance characteristics.
Two painted surfaces may have similar colors but different gloss levels.
A colorimeter evaluates color characteristics and color differences, while a gloss meter evaluates the amount of light reflected from a surface under defined measurement geometry.
For more comprehensive surface appearance inspection, some manufacturers may need both color and gloss measurement.
Benefits for Paint and Coating Manufacturers
Introducing instrumental color measurement can help companies improve:
Batch-to-batch consistency
Supplier inspection
Incoming QC
Production monitoring
Finished product inspection
Customer specification control
Internal QC documentation
Communication between departments
Instead of depending only on subjective descriptions, teams can discuss color quality using measurable information.
Reducing Customer Complaints
Color differences can be especially problematic when products from different batches are installed or displayed together.
A small variation that is difficult to notice when samples are inspected separately may become obvious when the products are placed side by side.
Routine color measurement can help identify these differences before shipment.
This is particularly important for products where appearance is a major part of the customer's purchasing decision.
Who Should Consider the Linshang LS173?
The LS173 may be considered by:
Paint manufacturers
Coating companies
Metal fabrication companies
Automotive component manufacturers
Appliance manufacturers
Furniture manufacturers
Plastic manufacturers
Printing and packaging companies
QA and QC departments
Supplier quality teams
It can be particularly useful for companies that want to move from purely visual color inspection toward objective color measurement.
Choosing the Right Colorimeter for Your Surface
Not every sample is identical.
Before selecting a colorimeter, users should consider factors such as:
Sample size
Surface shape
Surface texture
Measurement area
Required color parameters
Quality control tolerance
Production environment
Providing details about the actual sample can help determine whether the LS173 is appropriate for the intended application.
Linshang LS173 Paint and Coating Colorimeter Malaysia
MTM Precision supplies industrial testing and measurement instruments for manufacturing, engineering and quality control applications throughout Malaysia.
If your company needs to evaluate paint color, coating color, Delta E, batch-to-batch color consistency or finished product appearance, contact MTM Precision to discuss your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking for a Linshang LS173 Colorimeter for paint and coating color measurement in Malaysia? Contact MTM Precision for quotation, product information and application enquiries.
12 Aug 2026