Linshang LS173 Colorimeter for Printing and Packaging Color Inspection Malaysia
Linshang LS173 Colorimeter for Printing and Packaging Color Inspection Malaysia
Color consistency is an important part of quality control in the printing and packaging industry. Product boxes, labels, printed materials and branded packaging are often produced in different batches, yet customers expect the appearance to remain consistent.
The Linshang LS173 D/8 Touch Screen Colorimeter provides printing, packaging and manufacturing companies with an objective method for measuring color and comparing color differences between an approved reference and production samples.
For companies in Malaysia that currently depend mainly on visual inspection, instrumental color measurement can help make color quality control more consistent and measurable.
Why Is Color Consistency Important in Packaging?
Packaging is often the first thing a customer sees.
A product may be manufactured correctly, but inconsistent packaging colors can still create the impression of poor quality.
This becomes particularly noticeable when several packages are displayed side by side.
Common problems include:
Different colors between printing batches
Brand colors that do not match approved samples
Supplier-to-supplier variation
Labels with inconsistent colors
Cartons with noticeable shade differences
Packaging components that do not match
Color variation between repeat orders
For brands and manufacturers, maintaining consistent packaging appearance can therefore be an important QC requirement.
Why Visual Inspection Can Be Inconsistent
Many printing and packaging operations still use visual comparison as part of their color inspection process.
An operator may compare the new print with an approved sample and decide whether it looks acceptable.
However, visual judgement can be influenced by:
Lighting
Viewing conditions
Background color
Operator experience
Eye fatigue
Individual color perception
One inspector may consider a sample acceptable while another notices a difference.
The LS173 provides measurable color information to support a more objective inspection process.
Using an Approved Packaging Sample
A practical color control procedure starts with an approved reference.
This could be:
Customer-approved packaging
Master printed sample
Approved label
Reference carton
Standard color sample
Previous approved production batch
The new production sample can then be measured and compared against the reference.
A typical workflow is:
Approved Master → Measure Production Sample → Compare Color → Evaluate Color Difference → Accept or Investigate
This creates a clearer process for repeat production orders.
Delta E for Printing and Packaging QC
Delta E (ΔE) is commonly used to represent the measured difference between two colors.
In general:
Smaller ΔE = smaller measured color difference
Larger ΔE = greater measured color difference
For example, a company can measure an approved packaging sample and compare a new production batch against it.
The resulting color difference data can support the QC decision.
The acceptable Delta E tolerance should be established according to the company's application, customer requirements, printing process and quality standards.
A single universal Delta E limit should not automatically be applied to every printed product.
Brand Color Consistency
Brand identity often depends heavily on color.
A company's signature red, blue, green or other brand color may appear across:
Product boxes
Labels
Printed manuals
Promotional materials
Cartons
Displays
Packaging inserts
If these materials are produced by different printers or suppliers, maintaining consistent appearance can become difficult.
Instrumental color measurement provides companies with a more objective way to compare samples from different sources.
Batch-to-Batch Printing Comparison
Repeat orders are common in the printing industry.
A customer may reorder the same packaging after several months and expect the new batch to match the previous approved production.
However, changes in materials, ink, equipment or process conditions can produce color variation.
The LS173 can be used to compare suitable samples from different production batches.
This can help identify whether the latest production remains consistent with the approved reference.
Incoming Packaging Inspection
Manufacturers that outsource packaging production can use color measurement during incoming inspection.
For example, a manufacturer receives 20,000 printed boxes from a packaging supplier.
Instead of relying only on visual checking, the incoming QC team can sample the shipment and compare the color against an approved master.
This provides additional measurable information before the packaging materials are released for production.
Supplier Quality Control
Companies often source labels, cartons and other packaging materials from several suppliers.
Although every supplier receives the same artwork or color requirement, the actual production output may vary.
The Linshang LS173 can help companies compare suitable samples from:
Supplier A → Approved Standard
Supplier B → Approved Standard
Supplier C → Approved Standard
This creates a more consistent basis for evaluating supplier color performance.
In-Process Printing Inspection
Color measurement can also be performed during production rather than waiting until the entire printing job is completed.
For example:
Production Start → First Sample → Measurement → Mid-Run Sample → Measurement → Final Sample → Measurement
If the color begins moving outside the company's established criteria, the production team can investigate earlier.
Early detection may help reduce:
Reprinting
Material wastage
Customer rejection
Production delays
Sorting work
Costly repeat production
Packaging Quality Control for Manufacturers
Color inspection is not only relevant to printing companies.
Manufacturers that purchase packaging materials can also benefit from establishing their own incoming color inspection procedures.
Industries may include:
Food packaging
Cosmetics
Pharmaceutical packaging
Electrical products
Electronics
Consumer goods
Household products
Industrial products
Automotive components
Retail products
Where brand appearance matters, packaging color consistency can become an important part of overall product quality.
D/8 Color Measurement
The Linshang LS173 uses D/8 optical geometry, referring to diffuse illumination with an 8-degree viewing geometry.
Controlled measurement geometry provides a standardized approach to evaluating sample color.
For QC applications, this can improve repeatability compared with relying solely on visual judgement under changing environmental conditions.
Color Measurement Is Not the Same as Visual Appearance
Instrumental color measurement is an important QC tool, but companies should still consider the complete appearance of the printed product.
Factors such as:
Gloss
Surface texture
Printing finish
Material
Lamination
Metallic effects
Special coatings
can influence how a product looks.
Therefore, color measurement should form part of a complete quality control procedure rather than being treated as the only inspection criterion.
Creating a Repeatable Packaging Color QC Procedure
Companies can establish a simple inspection workflow:
Step 1: Approve and preserve a master sample.
Step 2: Define the measurement location and procedure.
Step 3: Establish appropriate acceptance criteria.
Step 4: Measure production or incoming samples.
Step 5: Compare measurements with the approved standard.
Step 6: Record results where necessary.
Step 7: Investigate samples outside the established tolerance.
This makes packaging color inspection easier to reproduce between different operators and production batches.
Who Should Consider the Linshang LS173?
The LS173 may be useful for:
Printing companies
Packaging manufacturers
Label manufacturers
Carton manufacturers
Brand owners
Manufacturing QC departments
Incoming inspection teams
Supplier quality teams
Purchasing departments
Production departments
It is particularly relevant for companies that want to introduce measurable color comparison into routine QC.
Linshang LS173 Colorimeter Supplier Malaysia
MTM Precision supplies testing and measurement instruments for manufacturing, industrial and quality control applications in Malaysia.
If your company needs a colorimeter for printing color inspection, packaging color comparison, Delta E measurement, supplier QC or batch-to-batch color consistency, contact MTM Precision to discuss your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking for a Linshang LS173 Colorimeter for printing and packaging color inspection in Malaysia? Contact MTM Precision for quotation, product information and application enquiries.
12 Aug 2026