Linshang LS173 Colorimeter for Industrial Color Measurement and Quality Control Malaysia
Linshang LS173 Colorimeter for Industrial Color Measurement and Quality Control Malaysia
For manufacturers, color consistency is not only about appearance. A noticeable difference between an approved sample and a production batch can result in rejection, rework, supplier disputes and customer complaints.
The Linshang LS173 Portable Colorimeter is designed for convenient color measurement and color difference comparison. With its D/8 measurement geometry and touch-screen operation, it can support routine quality control applications where objective color data is required.
For manufacturers and QC teams in Malaysia, the LS173 provides a practical way to move beyond purely visual color inspection.
What Is the Linshang LS173?
The Linshang LS173 is a portable colorimeter for measuring sample color and evaluating differences between colors.
Instead of depending only on the human eye, users can obtain numerical color information that can be incorporated into a quality control process.
Typical applications can include suitable:
Plastic products
Painted components
Coated surfaces
Printed materials
Packaging materials
Manufactured products
Consumer products
Industrial components
This makes the instrument relevant to QA, QC, production, R&D and supplier quality teams.
D/8 Measurement Geometry
An important characteristic of the LS173 is its D/8 optical geometry.
D/8 refers to diffuse illumination with an 8-degree viewing geometry.
Why does this matter?
Color can appear different depending on lighting and viewing conditions. Instrumental measurement uses controlled optical conditions to provide a more standardized method for evaluating sample color.
For industrial users, this can improve repeatability when measurements are performed by different operators or across different production batches.
More Than Just “What Color Is This?”
In manufacturing, the more important question is often not:
“What color is this product?”
Instead, QC teams usually need to know:
“How different is this sample from our approved standard?”
This is where color difference measurement becomes valuable.
A company can establish an approved master sample and compare subsequent production samples against it.
For example:
Master Sample → LS173 Measurement
Production Sample → LS173 Measurement
Compare → Evaluate Color Difference → QC Decision
This creates a much more systematic inspection process.
Delta E Color Difference Measurement
Delta E (ΔE) is widely used to describe the measured difference between two colors.
As a general principle:
Lower ΔE = smaller measured color difference
Higher ΔE = larger measured color difference
This allows manufacturers to move away from subjective descriptions such as:
“Almost the same.”
“Slightly darker.”
“A little more yellow.”
“Looks okay.”
Instead, color difference can become part of a measurable QC procedure.
The acceptable Delta E tolerance should be established according to the actual product, customer specification and internal quality requirements.
Color Measurement for Plastic Manufacturing
Plastic manufacturing is one of the applications where color consistency can be important.
Variation may result from:
Raw material batches
Pigments
Masterbatch
Mixing ratios
Processing parameters
Supplier differences
Production conditions
The LS173 can help users compare suitable plastic components against an approved master.
For injection molding operations, measurements can also be performed periodically during production to identify potential color variation before a large quantity of parts is produced.
Color Measurement for Paint and Coating
Painted and coated components can show differences even when the same nominal color specification is used.
Changes in formulation, substrate, coating process or production conditions may influence the finished appearance.
The LS173 can provide objective color measurement data for comparing suitable painted or coated samples with approved references.
It is important to remember that color, gloss and coating thickness are different measurement parameters.
Depending on the customer's specification, a manufacturer may require a colorimeter, gloss meter and coating thickness gauge for different aspects of surface quality control.
Color Measurement for Printing and Packaging
Packaging appearance can strongly influence brand presentation.
When cartons, labels or other printed materials from different production batches are displayed together, inconsistent colors can become noticeable.
For suitable printing and packaging applications, the LS173 can help users compare new production against an approved master sample.
This may be useful for:
Batch comparison
Incoming packaging inspection
Supplier comparison
Repeat production
Brand color QC
Incoming Quality Control – IQC
Color problems can enter the production process through incoming materials and components.
The LS173 can be incorporated into an Incoming Quality Control procedure.
A typical process may be:
Supplier Delivery → Sampling → Color Measurement → Compare with Master → Accept / Hold / Investigate
Detecting a color issue before materials enter production can help prevent larger downstream problems.
In-Process Quality Control – IPQC
Waiting until the end of production to discover a color problem can be expensive.
Instead, manufacturers can take samples during production.
For example:
First Piece → Measure
Mid-Batch → Measure
Final Batch → Measure
If the measured color begins to move outside established acceptance criteria, the production team can investigate earlier.
This can potentially reduce scrap, rework and production delays.
Outgoing Quality Control – OQC
Color measurement can also form part of final inspection.
Finished products can be compared against the approved standard before shipment.
For companies supplying customers with specific appearance requirements, objective measurement provides an additional layer of QC before products leave the factory.
Touch-Screen Operation
For routine production inspection, an instrument needs to be practical for operators to use.
The LS173 features a touch-screen interface, allowing measurement information to be accessed directly on the instrument.
This is useful for companies that need a portable color measurement solution for day-to-day QC rather than a purely laboratory-based system.
Why Portable Color Measurement Matters
Quality inspection does not always happen in a laboratory.
Measurements may be required at:
Incoming inspection areas
Production lines
QC rooms
Warehouses
Supplier inspection areas
Finished goods departments
A portable colorimeter allows the instrument to be brought closer to the actual inspection point.
This can make routine color measurement easier to integrate into existing QC workflows.
Linshang LS173 vs Visual Inspection
Visual inspection remains valuable because customers ultimately judge product appearance visually.
However, visual judgement can be affected by lighting, viewing conditions and differences between observers.
The two methods can therefore work together:
Visual Inspection → Evaluate Overall Appearance
LS173 Measurement → Evaluate Numerical Color Difference
Combining both approaches can provide a stronger quality control process.
Who Should Consider the Linshang LS173?
The LS173 may be considered by:
Manufacturing companies
Plastic injection molding companies
Paint and coating companies
Printing companies
Packaging manufacturers
QA departments
QC departments
Production engineers
Supplier quality engineers
Incoming inspection teams
R&D personnel
It is particularly relevant when color needs to be compared consistently between samples or production batches.
A Better Way to Handle Color Disputes
Consider a common manufacturing situation:
Customer: “The latest batch is a different color.”
Production: “It looks the same.”
Supplier: “Our material hasn't changed.”
QC: “There seems to be a slight difference.”
Without measurement data, the discussion can quickly become subjective.
With an established color measurement procedure, the conversation can focus on measurable results.
That is one of the biggest advantages of introducing a portable colorimeter into industrial quality control.
Is the Linshang LS173 Suitable for Your Application?
Before purchasing a colorimeter, consider:
Material being measured
Sample size
Sample shape
Surface characteristics
Measurement location
Required color parameters
Customer specifications
Required acceptance tolerance
If you are unsure, provide information about your actual sample when making an enquiry.
This can help determine whether the LS173 is appropriate for the intended measurement.
Linshang LS173 Portable Colorimeter Supplier Malaysia
MTM Precision supplies industrial testing and measurement instruments for manufacturing, engineering and quality control applications throughout Malaysia.
If you need a portable colorimeter for color difference measurement, Delta E comparison, plastic QC, paint inspection, packaging inspection, IQC, IPQC or OQC, contact MTM Precision to discuss your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking for the Linshang LS173 Portable Colorimeter in Malaysia? Contact MTM Precision for quotation, product information and application enquiries.
12 Aug 2026