Indoor Air Quality Monitoring for Schools and Classrooms with TENMARS TM-380 Malaysia
Indoor Air Quality Monitoring for Schools and Classrooms with TENMARS TM-380 Malaysia
Classrooms can contain many students in a relatively small enclosed space for long periods of time.
In Malaysia, classrooms may also be affected by hot and humid weather, air-conditioning, outdoor traffic pollution, nearby construction and seasonal haze.
For this reason, classroom indoor air quality should not be evaluated based only on whether the room feels cool or comfortable.
The TENMARS TM-380 Multi IAQ Monitor provides a portable solution for measuring CO₂, PM2.5, PM10, temperature and relative humidity in schools, classrooms, tuition centres and training facilities.
Why Monitor Classroom Indoor Air Quality?
Classroom environmental conditions can change considerably during a school day.
Important factors include:
Number of students
Classroom size
Door and window position
Air-conditioning
Mechanical ventilation
Outdoor air quality
Nearby traffic
Construction activities
Cleaning activities
Air purifier operation
A classroom with five people may behave very differently from the same classroom with thirty or forty people.
This makes actual measurement useful when investigating classroom conditions.
CO₂ Can Change with Classroom Occupancy
People produce carbon dioxide through respiration.
As more students enter an enclosed classroom, CO₂ levels can increase if ventilation does not provide sufficient air exchange.
The TENMARS TM-380 uses an NDIR CO₂ sensor, allowing users to monitor how CO₂ conditions change as classroom occupancy changes.
For example, measurements could be compared:
Before students arrive → During the lesson → During break → After the classroom is empty
This provides more information than taking only one measurement.
Why CO₂ Monitoring Is Useful
CO₂ measurement can be useful as part of a ventilation investigation in occupied spaces.
Consider two classrooms in the same building.
Classroom A: 15 students
Classroom B: 35 students
Even if both classrooms use similar air-conditioning systems, their indoor conditions may not be identical.
Portable monitoring allows maintenance or facility personnel to investigate individual rooms instead of assuming the entire building has the same conditions.
Air-Conditioning Is Not the Same as Ventilation
This is an important point for schools and commercial buildings.
A room can feel cool without necessarily having sufficient fresh-air exchange.
Air-conditioning primarily controls indoor temperature and, depending on the system, humidity.
Ventilation involves supplying or exchanging air.
Therefore, a cool classroom should not automatically be assumed to have ideal ventilation conditions.
CO₂ measurement can provide additional information when investigating this issue.
PM2.5 Monitoring During Malaysia Haze
During periods of haze or elevated outdoor particulate pollution, schools may reduce outdoor activities and keep students indoors.
But moving students indoors creates another question:
What is the particulate level inside the classroom?
Outdoor API/AQI readings provide information about outdoor conditions, but they do not directly measure the PM2.5 concentration inside a particular classroom.
The TENMARS TM-380 measures PM2.5 using a laser particulate matter sensor, allowing measurements to be taken directly inside the room.
Outdoor Pollution Can Enter the Classroom
Particulate matter may enter through:
Open windows
Open doors
Ventilation systems
Building entrances
Air leakage
Student movement between indoor and outdoor areas
Different classrooms may therefore show different readings.
For example, a classroom beside a busy road may have different particulate conditions from a classroom located further inside the building.
Actual measurements can help identify these differences.
PM10 Monitoring for Dust
The TM-380 also measures PM10.
This can be useful in schools affected by:
Nearby construction
Renovation work
Road dust
Cleaning activities
Open windows
Outdoor dust sources
Monitoring both PM2.5 and PM10 provides additional information when investigating particulate conditions.
CO₂ and PM2.5 Should Be Considered Together
During haze, one possible response is to close windows and doors to reduce outdoor particulate entry.
However, a heavily occupied classroom with reduced ventilation may experience increasing CO₂.
This creates a practical indoor air quality challenge.
Low PM2.5 + High CO₂
Particulate control may be effective, but ventilation should be investigated.
High PM2.5 + Low CO₂
Ventilation may be adequate, while outdoor or indoor particulate sources may require investigation.
High PM2.5 + High CO₂
Both particulate conditions and ventilation may need attention.
This is why measuring multiple parameters can provide more useful information than monitoring PM2.5 alone.
Check Air Purifier Performance
Some schools may operate portable air purifiers during haze periods.
The TENMARS TM-380 can be used for simple comparative measurements.
Before
Measure PM2.5 and PM10 before operating the purifier.
During Operation
Allow the purifier to operate and observe how particulate readings change.
Different Locations
Take readings:
Near the purifier
At student seating areas
At the back of the classroom
Near doors
Near windows
This can help determine whether particulate conditions are similar throughout the room.
Temperature and Humidity Matter Too
The TENMARS TM-380 also measures:
Temperature
Relative humidity
These parameters provide additional information about classroom environmental conditions.
This can be useful when investigating complaints such as:
Classroom feels too warm
Room feels humid
Air-conditioning seems ineffective
Conditions vary between classrooms
Instead of carrying separate instruments, several parameters can be checked with one portable meter.
Suggested Classroom Measurement Locations
For a basic classroom IAQ investigation, consider taking measurements at:
Classroom entrance
Teacher's area
Centre of classroom
Rear student seating area
Near windows
Near air-conditioning outlets
Near an air purifier
Corridor outside the classroom
Comparing these locations can help identify variations within the room and between indoor and adjacent areas.
Don't Take Only One Reading
Indoor air quality changes over time.
For example:
7:30 AM – Classroom empty.
8:00 AM – Students enter.
10:00 AM – Classroom occupied for several hours.
10:30 AM – Students leave for break.
11:00 AM – Classroom occupied again.
1:00 PM – School session ends.
CO₂, particulate matter, temperature and humidity may change throughout these periods.
The TENMARS TM-380 supports manual and automatic recording, making longer-term observation possible.
Suitable Educational Applications
The TENMARS TM-380 can be considered for:
Primary schools
Secondary schools
Private schools
International schools
Colleges
Universities
Tuition centres
Training centres
Computer rooms
Libraries
Lecture rooms
Laboratories
Useful for School Facility Management
School maintenance and facility teams can use portable IAQ measurements when investigating:
Poor ventilation concerns
Haze conditions
Dust complaints
Air purifier effectiveness
HVAC performance
Differences between classrooms
Indoor environmental complaints
Measurements can help determine where further investigation or corrective action may be required.
One Meter for Five IAQ Parameters
Instead of using separate instruments for different measurements, the TENMARS TM-380 combines:
CO₂ + PM2.5 + PM10 + Temperature + Relative Humidity
This makes it particularly convenient for walking inspections across multiple classrooms.
TENMARS TM-380 for Schools in Malaysia
Malaysia's combination of warm weather, widespread air-conditioning, urban traffic, construction activity and periodic haze makes indoor air quality monitoring relevant for many educational facilities.
The TENMARS TM-380 provides schools and facility professionals with a portable instrument for checking several important indoor environmental parameters.
It can be particularly useful when the objective is not simply to know the outdoor AQI, but to understand what is actually happening inside the classroom.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Contact MTM Precision for TENMARS TM-380 Multi IAQ Monitor enquiries in Malaysia.
13 Aug 2026