Langry APT200 for Rebar and Steel Bar Pull-Out Testing Malaysia

Langry APT200 for Rebar and Steel Bar Pull-Out Testing Malaysia

 

200kN Rebar Pull-Out Tester Malaysia

 

The Langry APT200 Anchor Pull-Out Tester is a professional hydraulic testing system with a maximum measurement range of 200kN, approximately equivalent to a 20-ton class pull-out tester.

 

The system is designed for pull-out testing applications involving suitable anchor rods, steel bars, expansion bolts and other anchoring components.

 

For construction contractors, engineering consultants, inspection companies and QA/QC teams in Malaysia, the Langry APT200 can provide a practical field testing solution where the pull-out resistance of an installed steel bar or anchoring element needs to be evaluated.

 

What Is Rebar Pull-Out Testing?

 

The term rebar pull-out test can describe different types of testing, so the test objective should be clearly defined.

 

In construction site applications, it may refer to applying tensile load to a reinforcing bar or steel bar that has been post-installed or anchored into concrete.

 

The purpose may be to verify whether the installed anchoring system can withstand a specified tensile test load.

 

This type of field verification should not automatically be confused with a controlled laboratory rebar-to-concrete bond strength test, which may require a specific specimen geometry, loading method, displacement measurement and applicable test standard.

 

The Langry APT200 is primarily a portable pull-out testing system for suitable field anchorage testing applications.

 

Why Test Post-Installed Rebar?

 

Post-installed reinforcing bars can be used in construction, extension, strengthening and retrofit applications.

 

Examples may include:

 

Structural extensions

 

Concrete strengthening

 

New-to-existing concrete connections

 

Building modification

 

Retrofit construction

 

Structural repair

 

Additional concrete elements

 

Anchored steel bars

 

Connection works

 

Where required by the project engineer or specification, selected installed bars may need to be tested to verify their anchorage performance.

 

How Does a Rebar Pull-Out Test Work?

 

The basic principle involves connecting the exposed steel bar to a hydraulic pull-out testing system and applying a controlled axial tensile load.

 

A typical field procedure may include:

 

Identifying the steel bar

 

Confirming the bar diameter

 

Recording the test location

 

Inspecting the surrounding concrete

 

Confirming the required test load

 

Selecting a suitable pulling connection

 

Positioning the hydraulic cylinder

 

Aligning the pulling system

 

Applying tensile load progressively

 

Monitoring the applied force

 

Holding the specified load if required

 

Recording observations

 

Releasing the hydraulic pressure safely

 

Inspecting the bar and substrate after testing

 

The actual procedure must follow the applicable project specification and approved test method.

 

Langry APT200 Technical Specifications

 

SpecificationLangry APT200Measurement Range0–200kNApproximate Capacity20 TonCylinder Center Hole35mmCylinder Stroke70mmCylinder WeightApprox. 13kgCommon AnchorageΦ6–Φ25Pull RodM24ConverterM6–M22Data Storage500 RecordsContinuous Working Time>200 HoursAccuracy ClassificationEN ISO 7500-1 Class 1

 

The 200kN measurement range makes the APT200 suitable for a variety of medium-to-heavy-duty anchorage testing applications.

 

Post-Installed Rebar and Chemical Anchoring

 

Post-installed reinforcing bars are often installed into drilled holes using an approved bonding or anchoring system.

 

The performance of the completed installation may depend on several factors.

 

These can include:

 

Correct hole diameter

 

Drilling method

 

Drilling depth

 

Hole cleaning

 

Bar diameter

 

Embedment depth

 

Adhesive selection

 

Adhesive installation

 

Curing time

 

Installation temperature

 

Concrete condition

 

Installer workmanship

 

Because installation conditions matter, testing selected installed bars may be specified as part of project QA/QC.

 

Why Hole Cleaning Matters

 

Hole cleaning can be particularly important for bonded post-installed anchoring systems.

 

Drilling creates dust and debris inside the hole.

 

If the anchoring system requires a particular cleaning procedure and that procedure is not followed, the bond condition may be affected.

 

The installation team should therefore follow the anchor or adhesive manufacturer's approved installation procedure.

 

A pull-out tester should not be treated as a substitute for correct installation practice.

 

Testing verifies the installation under the specified test conditions; it does not make a poorly installed anchor acceptable.

 

Why Embedment Depth Matters

 

Embedment depth is another important consideration in anchorage performance.

 

A deeper embedment does not automatically mean that every installation will achieve the same result, because performance also depends on the anchoring system, substrate and installation conditions.

 

Likewise, an insufficient embedment depth may prevent an installed bar from achieving its intended performance.

 

The actual required embedment should follow the engineering design and anchoring system requirements.

 

Proof Testing of Installed Steel Bars

 

A project may specify a proof test for selected post-installed bars.

 

In this type of test, a predetermined tensile load is applied according to the approved testing procedure.

 

The load may need to be maintained for a specified period while the operator monitors the installation.

 

The purpose is generally to verify the installed anchorage against defined project criteria rather than intentionally pull the bar to destruction.

 

Proof Testing vs Ultimate Pull-Out Testing

 

These are different test objectives.

 

Proof Test

 

A proof test typically checks whether an installed anchoring element can withstand a predetermined test load.

 

The intention is normally not to cause failure.

 

Ultimate Pull-Out Test

 

An ultimate test investigates behaviour at higher loads until a specified failure criterion occurs.

 

Possible observations may include:

 

Bar pull-out

 

Bond failure

 

Concrete breakout

 

Steel failure

 

Excessive movement

 

Other anchorage failure modes

 

Ultimate testing should be performed only under an appropriate engineering test plan.

 

200kN Is the Tester Capacity – Not the Required Rebar Test Load

 

The Langry APT200 has a maximum measurement range of:

 

0–200kN

 

This does not mean that every steel bar should be tested to 200kN.

 

The correct test load depends on factors such as:

 

Bar diameter

 

Steel properties

 

Anchoring system

 

Embedment depth

 

Concrete condition

 

Design requirement

 

Project specification

 

Engineer's approved test procedure

 

The tester provides the available force measurement capacity.

 

The project requirements determine how much load should actually be applied.

 

Can the APT200 Test Φ6 to Φ25 Anchoring Components?

 

The manufacturer's specifications list a common anchorage range of Φ6–Φ25 for the APT200 configuration.

 

However, diameter alone should not be used to determine whether a particular test can be performed.

 

Users must also consider:

 

Required test load

 

Connection method

 

Available exposed bar length

 

Adapter configuration

 

Reaction setup

 

Test geometry

 

Site accessibility

 

For unusual applications, the complete setup should be reviewed before testing.

 

Common Causes of Poor Rebar Pull-Out Test Results

 

Poor Hole Cleaning

 

Residual drilling dust can affect some bonded anchoring installations.

 

Insufficient Embedment

 

Incorrect embedment may reduce anchorage performance.

 

Incorrect Adhesive Installation

 

Improper mixing, dispensing or injection can affect bonding.

 

Insufficient Curing

 

Testing before the required curing period is complete may produce an unreliable result.

 

Incorrect Hole Diameter

 

The drilled hole should meet the anchoring system's requirements.

 

Poor Concrete Condition

 

Weak, cracked or deteriorated substrate can influence the result.

 

Incorrect Bar Preparation

 

The anchoring system may require specific preparation of the steel element.

 

Installation Workmanship

 

The final performance of a post-installed anchoring system depends heavily on correct installation.

 

Rebar Pull-Out Testing for Structural Extension Works

 

Building extension projects may require new concrete elements to be connected to an existing structure.

 

Post-installed bars can be used as part of these connections where specified by the structural design.

 

Typical applications may include:

 

New slabs

 

Additional beams

 

Wall extensions

 

Structural strengthening

 

Concrete extensions

 

Retrofit connections

 

Where verification is required, selected bars may be subjected to pull-out testing before subsequent construction proceeds.

 

Rebar Pull-Out Testing for Renovation and Retrofitting

 

Existing buildings frequently undergo modification.

 

New structural or supporting elements may need to connect to existing concrete.

 

This can create demand for:

 

Post-installed rebar

 

Chemical anchoring

 

Steel bar anchorage

 

Pull-out testing

 

Site verification

 

For contractors handling retrofit projects, a portable tester such as the Langry APT200 can provide a useful field-testing capability.

 

Rebar Pull-Out Testing for Infrastructure Projects

 

Post-installed anchoring systems can also be encountered in infrastructure projects.

 

Depending on the design, applications may involve:

 

Bridges

 

Retaining structures

 

Concrete structures

 

Utility structures

 

Structural modification

 

Repair works

 

Strengthening projects

 

Testing requirements vary significantly between projects, so the approved specification should always be followed.

 

Importance of Proper Alignment

 

The pulling force should be applied as axially as practical to the steel bar.

 

Poor alignment can introduce unwanted bending or side loading.

 

This may:

 

Influence the test result

 

Damage the pulling connection

 

Damage the bar

 

Create an unstable setup

 

Increase safety risk

 

The test arrangement should therefore be properly positioned before substantial tensile load is applied.

 

Reaction Setup Is Important

 

The hydraulic cylinder requires a stable reaction arrangement.

 

The reaction setup can affect how forces are transferred into the surrounding concrete.

 

The operator should consider:

 

Surface condition

 

Anchor position

 

Distance from concrete edges

 

Nearby anchors

 

Local concrete condition

 

Test fixture geometry

 

A poorly designed reaction arrangement can affect the test and should be avoided.

 

What Should Be Included in a Rebar Pull-Out Test Record?

 

A professional test record may include:

 

Project name

 

Test location

 

Bar identification

 

Bar diameter

 

Installation method

 

Anchoring material

 

Embedment information

 

Base material

 

Installation date

 

Test date

 

Required test load

 

Maximum applied load

 

Holding period

 

Observed movement

 

Visible cracking or damage

 

Test result

 

Operator details

 

Equipment identification

 

The Langry APT series supports storage of up to 500 measurement records, which can assist with test data management.

 

Safety During Rebar Pull-Out Testing

 

A 200kN hydraulic pull-out tester can generate substantial force.

 

Operators should:

 

Wear appropriate PPE

 

Inspect the equipment before use

 

Confirm all pulling connections

 

Check the hydraulic system

 

Maintain correct alignment

 

Establish a safe working area

 

Keep personnel away from the potential failure path

 

Avoid exceeding equipment limits

 

Follow the manufacturer's instructions

 

Follow the approved project test method

 

A bar, adapter or connection failing under high tensile load can present a serious hazard.

 

Why Choose Langry APT200 for Field Testing?

 

The Langry APT200 combines:

 

200kN maximum measurement range

 

Approximately 20-ton class capacity

 

Portable hydraulic loading

 

Digital force indication

 

70mm cylinder stroke

 

35mm cylinder centre hole

 

Data storage for up to 500 records

 

Long operating time

 

This makes it a practical option for contractors and inspection teams that require professional anchor and steel bar pull-out testing capability on site.

 

Langry APT100 vs APT200 vs APT300

 

ModelMaximum RangeApproximate CapacityAPT100100kN10 TonAPT200200kN20 TonAPT300300kN30 Ton

 

The correct model should be selected based primarily on the anticipated test load and test configuration.

 

The APT200 provides a useful middle range for users who require more capacity than a 100kN tester but do not necessarily need a 300kN system.

 

Frequently Asked Questions

 

Can the Langry APT200 test rebar?

 

The APT series is designed for suitable pull-out testing applications involving steel bars and anchoring components. The actual setup must be compatible with the bar, required load and test method.

 

What is the maximum load range of the APT200?

 

The APT200 has a maximum measurement range of 200kN, approximately a 20-ton class system.

 

Does every rebar need to be tested to 200kN?

 

No. The required load must follow the engineering design, anchoring system, project specification and approved test method.

 

Can the APT200 test post-installed rebar?

 

It can be used for suitable field pull-out testing of post-installed anchoring elements when the required connection, reaction arrangement and test method are appropriate.

 

Is rebar pull-out testing the same as a laboratory bond strength test?

 

Not necessarily. A field pull-out verification test and a controlled laboratory rebar-concrete bond test may have different objectives, specimen configurations, measurements and standards.

 

Can the tester be used on construction sites?

 

Yes. The Langry APT series is intended for portable field testing applications.

 

Where can I buy a 200kN rebar pull-out tester in Malaysia?

 

MTM Precision Sdn. Bhd. supplies Langry anchor pull-out testing equipment and other construction testing instruments in Malaysia.

 

Rebar and Anchor Pull-Out Tester Supplier Malaysia

 

Before purchasing a pull-out tester, provide the supplier with as much application information as possible.

 

Useful information includes:

 

What are you testing?

 

Bar or anchor diameter

 

Expected test load

 

Required maximum load

 

Exposed bar or thread size

 

Base material

 

Test location

 

Required test method

 

This makes it easier to determine whether the Langry APT100, APT200 or APT300 is suitable for the application.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

 

Showroom & Service Centre

 

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346

 

For Langry APT200 Rebar and Steel Bar Pull-Out Tester Malaysia, anchor testing equipment, construction testing instruments and product enquiries, contact MTM Precision.


 

11 Aug 2026