How to Validate a UV LED Curing Process with Linshang LS137 UV Energy Meter Malaysia
How to Validate a UV LED Curing Process with Linshang LS137 UV Energy Meter Malaysia
When a new UV LED curing machine is installed, one of the first questions should not simply be:
“Does the UV lamp turn on?”
A more useful question is:
“What UV curing conditions produce an acceptable product, and how can we verify those conditions again in the future?”
This is the purpose of UV curing process validation.
For printing, coating, adhesive bonding, electronics and automated manufacturing applications, the Linshang LS137 UV Energy Meter can provide measurable UV data that helps companies establish a known-good production baseline.
What Is UV Curing Process Validation?
UV curing process validation means establishing and documenting the production conditions that consistently produce an acceptable finished product.
Depending on the application, these conditions may include:
UV wavelength
UV irradiance
Accumulated UV energy
Exposure duration
UV power setting
Conveyor speed
Working distance
Process temperature
Material type
Material thickness
The objective is to move from:
“This machine setting seems to work.”
to:
“These measured conditions have been verified to produce acceptable results.”
Why Is Validation Important?
Without a baseline, troubleshooting becomes difficult.
Suppose a UV curing process works perfectly today.
Six months later, product quality deteriorates.
The maintenance team measures the UV system.
But there is a problem:
Nobody recorded the UV conditions when production was good.
Now the company has a UV reading but no historical reference.
This is why process validation should begin while the equipment is operating correctly.
When Should a UV Curing Process Be Validated?
Validation or re-verification should be considered when:
Installing a new UV curing machine
Introducing a new product
Introducing a new UV ink
Changing UV coating
Changing UV adhesive
Installing a new UV LED module
Changing conveyor speed significantly
Changing curing distance
Modifying machine configuration
Moving equipment
Performing major maintenance
The exact validation requirements depend on the company's quality system and production process.
What Can the Linshang LS137 Measure?
The Linshang LS137 provides several parameters useful for UV LED curing validation:
UV Energy
UV Irradiance
Peak UV Irradiance
Measurement Duration
Temperature
Maximum Temperature
These values can be recorded together with machine settings and product-quality results.
Confirm the UV Source First
The LS137 is designed for UV LED light sources.
Its spectral response range is approximately:
340–420 nm
and it is calibrated using a:
395 nm UV LED source
Common industrial UV LED curing wavelengths can include:
365 nm
385 nm
395 nm
405 nm
Always confirm the actual UV wavelength before selecting the meter.
Step 1 – Record the Machine Configuration
Before beginning process trials, record the equipment configuration.
For example:
Machine: UV Curing Line 01
UV Source: UV LED
UV Wavelength: 395 nm
Number of UV Modules: Recorded
Working Distance: Recorded
Cooling System: Normal
This creates a clear reference for future comparisons.
Step 2 – Establish the Initial UV Power Setting
Select the UV power setting according to:
Equipment recommendations
Material requirements
Existing process knowledge
Supplier recommendations
Do not assume that the displayed power percentage is the actual UV irradiance.
For example:
Machine Setting = 80%
is not the same as an independent UV measurement.
Use the LS137 to record the actual UV conditions.
Step 3 – Measure Peak UV Irradiance
Peak irradiance provides information about the maximum UV intensity encountered during the curing process.
This can be useful for comparing:
Different power settings
Different UV modules
Different machines
Different working distances
Record the peak value for each process trial.
Step 4 – Measure Accumulated UV Energy
For curing processes, accumulated UV energy can be especially important.
Consider a conveyor line.
The product receives UV exposure only while passing through the curing zone.
Therefore:
UV Output + Exposure Time = Accumulated UV Exposure
Changing conveyor speed can significantly affect the total UV energy received by the product.
Record accumulated UV energy for each process trial.
Step 5 – Record Exposure Duration
Exposure time is another important variable.
For stationary curing:
Longer Exposure → Generally More Accumulated UV Energy
For conveyor curing:
Slower Conveyor → Longer Exposure
The LS137 records measurement duration, helping users understand the complete curing cycle.
Step 6 – Record Temperature
The LS137 also provides temperature and maximum temperature information.
This can be useful when working with:
Plastic
Film
Electronics
Adhesives
Heat-sensitive substrates
The acceptable temperature depends on the specific product and production process.
Step 7 – Test the Finished Product
UV measurement alone does not determine whether the product is acceptable.
The measured data should be linked to actual quality tests.
Depending on the application, these may include:
Adhesion
Scratch resistance
Surface hardness
Tackiness
Bond strength
Appearance
Chemical resistance
Customer-specific tests
The objective is to identify the UV conditions associated with an acceptable product.
Step 8 – Compare Different Settings
For process development, several controlled trials may be performed.
For example:
Trial A
Lower UV power or faster conveyor speed.
Record UV energy and product result.
Trial B
Medium setting.
Record UV energy and product result.
Trial C
Higher exposure.
Record UV energy and product result.
This allows engineers to identify a practical production window.
Don't Optimize Only for Maximum UV Energy
More UV is not automatically better.
The objective should be:
Sufficient and controlled UV exposure for the required curing result.
Excessive exposure may be unnecessary and can potentially affect:
Production efficiency
Energy consumption
Heat-sensitive materials
Equipment operating conditions
The correct curing parameters should be based on the material and validated production result.
Example: UV LED Printing Machine Validation
A printing company installs a new 395 nm UV LED printing system.
The team tests several production speeds.
For each test, it records:
Printing speed
UV power setting
Peak irradiance
Accumulated UV energy
Exposure duration
Print quality
Suppose one setting provides:
Good adhesion
No tackiness
Good scratch resistance
Acceptable production speed
That condition can become the initial validated baseline.
Example: UV Coating Process Validation
A manufacturer introduces a new UV coating.
Instead of using the previous machine settings automatically, the company performs controlled curing trials.
For each trial:
Measure UV → Cure Product → Test Coating → Record Result
This creates data specifically for the new coating rather than assuming it behaves exactly like the previous material.
Example: UV Adhesive Validation
An electronics company introduces a new UV adhesive for component bonding.
The process engineer evaluates different exposure conditions and then performs bond-strength testing.
Once an acceptable curing window is established, the corresponding LS137 measurements are documented.
Future production checks can then be compared against this reference.
Establish a Known-Good Baseline
Once the process is validated, record the final conditions.
A basic record might include:
Machine ID:
Product:
UV wavelength:
UV power setting:
Working distance:
Conveyor speed / exposure time:
Peak UV irradiance:
Accumulated UV energy:
Maximum temperature:
Quality result: PASS
This becomes the known-good production baseline.
Why the Baseline Is Valuable Later
Several months later, curing quality changes.
Instead of guessing, engineers can measure the system again.
Then ask:
Is peak irradiance still similar?
Is accumulated UV energy still similar?
Has exposure duration changed?
Has temperature changed?
This greatly improves troubleshooting.
Validate After UV LED Replacement
A replacement UV LED module should not automatically be assumed to reproduce the original curing conditions.
After replacement:
Confirm installation.
Confirm working distance.
Set the required machine parameters.
Measure UV output.
Compare against the baseline.
Verify finished-product quality.
This helps confirm that the machine is ready to return to production.
Validate After Conveyor-Speed Changes
Suppose production wants to increase speed by 20%.
Do not rely only on visual inspection of the finished product.
Measure:
Before Speed Increase
and
After Speed Increase
Compare accumulated UV energy and then verify product quality.
This provides evidence that the faster process remains acceptable.
Validate After Working-Distance Changes
If the UV module or product position changes, UV irradiance at the curing surface may also change.
This can occur after:
Fixture modification
Product-height change
Machine servicing
Mechanical adjustment
Measure again before assuming the original curing parameters remain valid.
High-Intensity UV LED Measurement
The Linshang LS137 supports UV irradiance measurement up to:
40,000 mW/cm²
This makes it relevant to many high-intensity industrial UV LED curing applications within its specified operating conditions.
LS137 vs LS136 for Process Validation
Before selecting the meter, identify the curing technology.
UV LED Curing
Consider:
Linshang LS137
Traditional High-Pressure Mercury UV Curing
Consider:
Linshang LS136
The detector should match the spectral characteristics of the UV source.
Who Can Use LS137 for Process Validation?
The LS137 can be useful for:
Process Engineers
Production Engineers
QA Engineers
QC Technicians
Maintenance Engineers
Equipment Engineers
R&D Teams
Machine Suppliers
Potential applications include:
UV printing
Packaging
Label printing
UV coating
Electronics manufacturing
PCB production
UV adhesive bonding
Automated manufacturing
From Machine Settings to a Controlled Process
A weak approach is:
Machine = 80% → Product Looks Good → Start Production
A stronger approach is:
Set Machine → Measure UV → Test Product → Record Result → Establish Baseline → Monitor
This gives the company a measurable reference that can be used for future quality control and troubleshooting.
Looking for a UV Energy Meter for Process Validation in Malaysia?
MTM Precision supplies industrial testing and measurement instruments for manufacturing, engineering, maintenance and QA/QC applications in Malaysia.
If you are installing or validating a UV LED curing process, provide us with:
UV wavelength
UV source type
Curing machine brand and model
Application
Expected UV intensity
Conveyor speed or exposure time
We can assist you in determining whether the Linshang LS137 UV Energy Meter is suitable for your UV LED curing application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Contact MTM Precision for Linshang LS137 UV Energy Meter enquiries, process-validation applications, technical information and quotation in Malaysia.
13 Aug 2026