Solar Power Meter for Building Glass and Window Performance Testing Malaysia

Solar Power Meter for Building Glass and Window Performance Testing Malaysia

 

Glass plays an important role in modern commercial, residential and industrial buildings. Large windows and glass fa่Žฝades provide natural lighting and architectural appeal, but they can also allow significant solar energy to enter indoor spaces.

 

In Malaysia's tropical climate, controlling solar heat through windows can contribute to indoor comfort and building energy management.

 

The TENMARS TM-206A Solar Power Meter can be used to compare solar radiation before and after sunlight passes through building glass, coated glass or solar control film.

 

Why Measure Solar Radiation Through Building Glass?

 

Windows can influence the amount of solar energy entering a building.

 

This is particularly relevant for:

 

Office buildings

 

Shopping centres

 

Hotels

 

Factories

 

Hospitals

 

Schools

 

Residential properties

 

Commercial shoplots

 

Glass fa่Žฝades

 

Different glass and solar film products can affect transmitted solar radiation differently.

 

A portable solar power meter provides a simple way to perform comparative field measurements.

 

TENMARS TM-206A Solar Power Meter

 

The TENMARS TM-206A is a handheld instrument designed for solar radiation measurement.

 

It provides readings in:

 

W/m่™

 

BTU/(ft่™่ทฏh)

 

with a measurement range up to 1999 W/m่™.

 

This makes it suitable for outdoor solar measurements as well as comparative measurements involving transparent materials.

 

How to Test Solar Radiation Through Building Glass

 

A simple comparison can be performed using measurements from both sides of the glass.

 

Step 1: Measure Incoming Solar Radiation

 

Measure solar radiation where the sensor receives direct sunlight.

 

For example:

 

Incoming solar radiation: 920 W/m่™

 

Step 2: Measure Behind the Glass

 

Move the sensor behind the window while maintaining a similar measurement orientation.

 

For example:

 

Behind the glass: 590 W/m่™

 

The difference provides a practical indication of how much the measured solar radiation has been reduced after passing through the glass.

 

Testing Solar Control Film

 

The same method can be used before and after solar film installation.

 

For example:

 

Incoming solar radiation: 900 W/m่™

 

Standard glass: 610 W/m่™

 

Glass with solar control film: 260 W/m่™

 

Under these particular conditions, substantially less measured solar radiation reaches the sensor after passing through the solar-film-treated glass.

 

This type of comparison can be useful for contractors and facility managers.

 

Before-and-After Window Film Assessment

 

A useful application is documenting measurements before and after a building retrofit.

 

Before Installation

 

Record the solar radiation behind the existing glass.

 

After Installation

 

Repeat the measurement after the solar control film has been installed.

 

The resulting readings provide a straightforward numerical comparison that can be included in inspection or maintenance records.

 

Comparing Different Windows

 

Not every window in a building receives the same amount of sunlight.

 

Solar exposure can vary depending on:

 

Building orientation

 

Time of day

 

Nearby structures

 

Trees

 

External shading

 

Window position

 

Glass type

 

The TM-206A can help facility teams compare solar radiation at different locations.

 

For example:

 

Window A: 280 W/m่™

Window B: 510 W/m่™

Window C: 690 W/m่™

 

This can help identify areas experiencing greater solar exposure.

 

Useful for Facility Management

 

Facility managers may need to investigate complaints such as:

 

Certain rooms becoming very hot in the afternoon

 

Uneven temperatures near windows

 

Excessive solar exposure

 

Poor performance of existing window film

 

Differences between different parts of a building

 

Solar radiation measurements can provide additional information during such investigations.

 

The readings can then be considered alongside indoor temperature, HVAC operation, building orientation and other factors.

 

Supporting Building Energy Management

 

Solar heat entering through windows can increase cooling demand.

 

In a tropical country such as Malaysia, air-conditioning can represent a significant part of a building's electricity consumption.

 

Reducing unwanted solar gain through appropriate glass, shading or solar film may support broader energy-efficiency strategies.

 

A portable solar power meter can assist with basic field comparisons before and after improvement work.

 

Solar Measurement and ESG

 

Energy efficiency is increasingly relevant to corporate sustainability and ESG initiatives.

 

Building operators may be evaluating:

 

Electricity consumption

 

HVAC efficiency

 

Indoor environmental conditions

 

Energy-saving retrofits

 

Solar control measures

 

Building envelope performance

 

Solar radiation measurements can form one small part of the data collected when investigating energy-efficiency opportunities.

 

The TM-206A does not replace a complete building energy audit, but it can provide useful field measurements for specific solar exposure assessments.

 

Solar Power Meter Is Not a Complete Glass Performance Analyzer

 

It is important to use the correct instrument for the required measurement.

 

The TM-206A provides solar radiation measurements and practical before-and-after comparisons.

 

Formal evaluation of architectural glass may require specialised laboratory equipment and parameters such as:

 

Visible Light Transmission

 

Solar Heat Gain Coefficient

 

U-value

 

UV transmission

 

Spectral transmission

 

Therefore, TM-206A field measurements should not be presented as certified laboratory glass-performance results.

 

Tips for Better Measurements

 

Solar conditions can change rapidly.

 

For more meaningful comparisons:

 

Keep sensor orientation consistent

 

Take measurements close together in time

 

Avoid accidentally shading the sensor

 

Repeat measurements

 

Record the measurement location

 

Record time and weather conditions

 

Compare similar test conditions

 

These practices improve the usefulness of the collected data.

 

Who Can Use the TENMARS TM-206A?

 

Potential users include:

 

Facility management companies

 

Building maintenance teams

 

Solar film contractors

 

Glass suppliers

 

Building contractors

 

Energy consultants

 

HVAC consultants

 

Engineering companies

 

Universities and laboratories

 

The same instrument can also be used for solar PV irradiance measurements, making it useful across multiple applications.

 

Building and Solar Testing Equipment Supplier Malaysia

 

The TENMARS TM-206A Solar Power Meter provides a practical solution for professionals who need portable solar radiation measurements for building glass, solar film and photovoltaic applications.

 

MTM Precision supplies professional testing and measurement equipment for building, solar, environmental, electrical and industrial applications in Malaysia.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

 

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

๐ŸŒ Website: www.mtmpre.com.my

๐Ÿ“ง Email: mtmpre@yahoo.com

๐Ÿ“ฑ WhatsApp: +6016-660 7346


 

15 Aug 2026