TENMARS TM-207 Solar Power Meter for Solar Irradiance Measurement Malaysia

TENMARS TM-207 Solar Power Meter for Solar Irradiance Measurement Malaysia

 

Solar irradiance is an important measurement in solar PV installation, renewable energy assessment, building evaluation and solar transmission testing. The TENMARS TM-207 Solar Power Meter provides a simple and portable solution for measuring solar radiation intensity directly in the field.

 

Designed for practical solar power measurement, the TM-207 allows users to quickly evaluate available sunlight and compare solar radiation at different locations, angles and conditions.

 

What Is the TENMARS TM-207?

 

The TENMARS TM-207 Solar Power Meter is a handheld instrument designed to measure solar radiation.

 

It can display solar power intensity in:

 

W/m²

 

BTU/(ft²·h)

 

With a measurement range of up to 1999 W/m², the TM-207 is suitable for many outdoor and indoor solar radiation testing applications.

 

Its spectral response covers approximately 400–1100 nm, making it useful for practical solar energy and solar transmission measurements.

 

Why Measure Solar Irradiance?

 

The amount of solar radiation reaching a surface can vary significantly depending on:

 

Time of day

 

Weather conditions

 

Installation location

 

Panel orientation

 

Tilt angle

 

Nearby buildings

 

Trees and other shading

 

Glass or window film

 

Seasonal conditions

 

For solar PV applications, simply knowing that an area receives sunlight is not enough.

 

Actual measurement provides useful field data for comparing different locations and installation conditions.

 

Solar PV Site Assessment

 

One important application of the TENMARS TM-207 is preliminary solar PV site assessment.

 

A technician can take measurements at different positions around a proposed installation area and compare the solar radiation levels.

 

For example, measurements can be taken on:

 

Residential rooftops

 

Factory roofs

 

Commercial buildings

 

Warehouses

 

Car parks

 

Open land

 

Solar PV installation sites

 

This helps identify areas receiving stronger or more consistent solar radiation.

 

Checking Solar Panel Position and Angle

 

Solar panel orientation and tilt can affect the amount of solar radiation reaching the panel surface.

 

Using the TM-207, installers can compare readings at different angles and positions.

 

This provides a practical way to evaluate which orientation receives higher solar radiation under the actual site conditions.

 

The instrument can therefore be useful during installation, inspection and troubleshooting work.

 

Detecting the Effect of Shading

 

Partial shading from buildings, trees, rooftop equipment and other structures can influence solar PV performance.

 

With a portable solar power meter, technicians can compare irradiance between shaded and unshaded locations.

 

This makes the TM-207 useful as a quick field assessment instrument when investigating whether environmental conditions may be contributing to lower solar energy production.

 

Window Tint and Solar Film Testing

 

The TM-207 is not limited to photovoltaic applications.

 

It can also be used to compare solar radiation before and after passing through:

 

Automotive window tint

 

Solar control film

 

Building glass

 

Transparent materials

 

Window glazing

 

For example, a reading can first be taken under direct solar radiation and then compared with a measurement behind the glass or film.

 

The difference provides a practical indication of how much solar radiation is being transmitted.

 

Building and Energy Efficiency Applications

 

Solar radiation entering a building through windows can contribute to indoor heat gain.

 

For building inspection and energy-related assessment, solar radiation measurements can help users investigate differences between glazing systems, window films and different sides of a building.

 

This makes portable solar power measurement relevant to areas such as:

 

Building inspection

 

Energy efficiency studies

 

HVAC assessment

 

Green building projects

 

Facility management

 

Solar heat gain investigation

 

Solar Power Meter vs Lux Meter

 

A common mistake is assuming that a lux meter and solar power meter perform the same job.

 

They measure different quantities.

 

A lux meter measures illuminance based primarily on human visual response and reports the result in lux.

 

A solar power meter, such as the TENMARS TM-207, measures solar radiation intensity and displays the result in units such as W/m².

 

Therefore, users evaluating solar radiation or solar PV conditions should select an instrument designed specifically for solar power measurement.

 

Who Should Consider the TENMARS TM-207?

 

The TM-207 can be useful for:

 

Solar PV installers

 

Solar contractors

 

Electrical contractors

 

Building inspectors

 

Facility management teams

 

Energy consultants

 

Automotive tint installers

 

Window film suppliers

 

Engineering companies

 

Technical colleges and universities

 

Maintenance departments

 

Its portable design makes it particularly convenient for field measurements where a quick solar radiation reading is required.

 

Why Use a Portable Solar Power Meter in Malaysia?

 

Malaysia receives strong solar radiation throughout the year, making solar PV increasingly relevant for residential, commercial and industrial facilities.

 

However, actual solar exposure can vary considerably between sites.

 

Using a portable instrument such as the TENMARS TM-207 Solar Power Meter allows contractors and engineers to obtain real measurements instead of relying only on visual judgement.

 

For solar installation, glass testing, building assessment and solar radiation comparison, this can provide useful additional information for technical decision-making.

 

Looking for TENMARS TM-207 Solar Power Meter in Malaysia?

 

MTM Precision supplies professional testing and measurement instruments for industrial, electrical, environmental, building and engineering applications in Malaysia.

 

For TENMARS TM-207 Solar Power Meter enquiries, technical information, pricing or availability, contact our team.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

 

🌐 Website: www.mtmpre.com.my

📧 Email: mtmpre@yahoo.com

📱 WhatsApp: +6016-660 7346


 

15 Aug 2026